欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 新闻资讯

    锉刀是如何生锈的如何保养

    2018-10-21 21:52:32 无锡盛发地坪科技有限公司 阅读

    锉刀的保养1、新锉刀先使用一面,等用钝后再使用另一面。2、在粗锉时,应充分使用锉刀的有效全长,避免局部磨损。3、锉刀上不可沾油和沾水。4、锉削时,如锉屑嵌入齿缝内必须及时用钢丝刷清除锉齿上的切屑,5、不可锉毛胚件的硬皮及经过淬硬的工件,锉削铝、锡等软金属,应使用单齿纹锉刀。6、铸件表面如有硬皮,则应先用旧锉刀锉刀的有i齿侧边锉去硬皮,然后再进行加工。7、锉刀使用完毕时必须清刷干净,以免生锈。8、不可与其他工具或工件堆放在一起,也不可与其他锉刀互相重叠堆放,以免损坏锉齿。

    The maintenance of the file is 1. First use the new file, then use the other side after blunt. 2, in rough file, the full length of the file should be fully used to avoid local wear. 3, file must not be stained with oil and water. 4. Filing, such as filings embedded in the teeth slot must be timely with wire brush to remove the chip on the file teeth, 5, can not file the hard skin of embryonic parts and hardened workpieces, file aluminum, tin and other soft metals, should use a single-tooth grained file. 6. If there is hard skin on the surface of the castings, the hard skin should be removed by using the old file or the side file with I teeth, and then processed. 7, when the file is finished, it must be cleaned to avoid rusting. 8. Do not stack with other tools or workpieces or overlap with other files to avoid damage to the teeth of the file.


    标签:   钢锉 锉刀 环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】