Epoxy floor is easy to maintain, low maintenance costs, and wear-resistant beautiful, is a very wide range of application of a floor. Many friends do not know how thick the epoxy floor generally? The following epoxy floor manufacturer small edition for you to introduce the epoxy floor acceptance standards in detail. Epoxy floors are usually thicker. Epoxy floors can be designed according to different application requirements: thin coating, 1-5mm thick self-leveling floor, anti-skid and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating and so on. Epoxy floor can be roughly divided into: epoxy resin terrazzo floor, epoxy resin coloured sand pressed sand floor, epoxy resin self-leveling floor, epoxy resin mortar floor, epoxy resin flat coating floor.
1. When the ambient temperature is 25 C, the hardness should reach 80% after 2-3 days.
2, the surface can not appear sticky phenomenon;
3, bubble: flat coated, mortar type no bubbles, self leveling allows 1 small bubbles /10 square meters;
4, good leveling, no trowel marks, large area of the interface is basically smooth.
5, no floating color and flower, uniform color, large area interface allows very insignificant chromatic aberration;
6, there is no coarse impurity, but it allows the floating dust in the air to drop into the minimal defect.
7. The surface of the floor should be smooth and smooth, and the gloss should meet the design requirements (high gloss (> 90, gloss (> 70, half gloss 50-70). The flat coating type is glossy and the water-borne is half gloss-no gloss.
8, orange peel and mortar anti slip surface effect should be very obvious.
How thick is the epoxy floor?
Scope of application
Epoxy floors have been used for functional floors from the beginning, such as anti-corrosion, wear-resistant, anti-skid, to general industrial floors; besides functional requirements, they also have decorative effects. On the basis of the wide application of industrial floor, with the continuous improvement of people's living standards, it has been widely used in home decoration. Floor paint has become one of the fastest growing industries in China and has attracted public attention. It can be manufactured in a factory like cement products, and has a bright future. It is suitable for all kinds of venues, such as factory buildings, machine rooms, warehouses, laboratories, wards, operating rooms, workshops, etc.
Epoxy floor has the characteristics of strong acid and alkali resistance, wear resistance, pressure resistance, impact resistance, mildew resistance, waterproof, dustproof, anti-skid, anti-static, electromagnetic wave and so on. It has bright colors and is easy to clean. It uses a one-time coating process, no matter how large the area, there is no joint, but also a dust-free material, with strong adhesion, abrasion resistance, hardness and other characteristics.
Epoxy floor is widely used in electronic factories, machinery factories, hardware factories, pharmaceutical factories, automobile factories, hospitals, aviation, aerospace bases, laboratories, offices, supermarkets, paper mills, chemical plants, plastic processing factories, textile factories, tobacco factories, confectionery factories, breweries, beverage factories, meat processing factories, parking lots, etc. Face coating. It has been accepted and used by many manufacturers in China.
标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工