In recent years, the epoxy floor market has gradually replaced the traditional floor laying, epoxy floor than the ordinary floor laying cost is lower, and seamless, with strong corrosion resistance and wear resistance, we follow the epoxy floor manufacturer knitted together to understand what the epoxy floor matters needing attention. Treatment of epoxy floor surface for epoxy floor notices
The first thing to note about the epoxy floor is that the newly completed cement floor must be maintained before it can be constructed. About 28 days before it is laid, it is necessary to remove the cement slurry, old paint and adherent garbage debris on the surface, thoroughly remove the oil stains on the surface, and can be treated with the king of kerosene detergent. It is also necessary to remove the accumulated water and make the tide clear. Bottom drying, so that the surface of the clean need to use dust-free sweeper and large vacuum cleaner to complete, flat surface allowable gap for 2-2.5mm, moisture content below 6%, PH value 6-8. The surface of epoxy floors should be ground with a dust-free grinder and cleaned thoroughly with a vacuum cleaner. Epoxy mortar or putty should be used to fill the holes and obvious depressions on the surface of the epoxy floors. After drying, the floors should be ground and cleaned.
Matters needing attention in construction of epoxy floor
In the precautions of epoxy floor construction site environmental temperature should be higher than 5 C, relative humidity is less than 85% before construction, construction site, time, temperature, relative humidity, surface treatment of the floor, material and other records for reference, after the paint construction, should immediately clean the relevant equipment and tools.
Safety technical requirements for epoxy floor precautions
Notice in the safety of the epoxy floor requires that the construction site should be surrounded by a good warning belt and hang a good warning sign, the construction site around 10 meters is strictly prohibited open fire operation, smoking, the use of high-pressure airless spraying pump should be properly grounded, paint and diluent should be placed in a well-ventilated warehouse, work to pay attention to personal protection. The use of electric tools must be responsible for someone who needs to cut off the power before leaving.
Use and maintenance of epoxy floor notices
Maintenance and use of epoxy floors are also important points for attention. When the paint is finished, it should not be used during the maintenance period. Ventilation equipment and fire prevention measures should be strengthened. Floors should be used. Producers should not wear nailed leather shoes to walk on the floors. All working appliances should be installed with a fixed special frame. Strictly prohibited to carry with them. Sharp angle metal parts and other objects collide with the ground, resulting in damage to the ground coating. When installing equipment and other important objects in the workshop, the supporting points on the ground should be padded with thick rubber and other software materials. It is forbidden to use metal pipes and other towing equipment on the ground. When welding and other high-temperature operations are carried out in the workshop, asbestos cloth and other refractories should be used to pave the place where sparks are spattered to prevent the coating from burning out. Once the floor has been damaged, timely use of paint repair, so as not to oil dirt through the damage penetrated into the cement, resulting in a large area of paint off. When cleaning the floor in a large area in the workshop, do not use intensified chemical solvents (toluene, banana water, etc.) general use of detergent, soap, water, etc., with a cleaning machine, in the absence of a cleaning machine, you can use sawdust sprinkled and then clean. In winter construction, the ambient temperature is below 5 C, and winter solventless epoxy industrial floor coatings can be used.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工