欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪之防静电地坪施工要注意哪些问题?

    2018-10-20 08:30:16 无锡盛发地坪科技有限公司 阅读

    环氧地坪根据功能或者材料不同可分为多类,但本质上仍旧是属于环氧地坪的一种。由于轻工业制造、建筑安装等行业的对精密仪器的准确度的要求,需要在这些电子工厂内铺装上特殊的环氧地坪材料能够减少静电对仪器的伤害,这时环氧地坪中的防静电地坪就能够恰好地发挥作用了。

    Epoxy floor can be divided into many types according to its function or material, but it is still one kind of epoxy floor in essence. Because of the accuracy requirements of precision instruments in light industry, construction and installation industries, special floor materials need to be paved in these electronic factories to reduce static electricity damage to the instrument, then the antistatic floor in the epoxy floor can just play its role.

    防静电地坪拥有环氧地坪的一切优异性能,可快速排泄静电电荷、防静电效力持久,表面电阻率达到106Ω-109Ω、地面电阻排泄符合国际GB6650-86A标准。防静电地坪整体无缝,可以能达到防尘、坚韧耐磨、耐冲击、耐重压、耐腐蚀、耐溶剂、平整亮丽、着色自由、便于清理、维护,保养,且使用寿命长。可以做到防止、消除静电、电磁波产生 、干扰破坏,抗静电效力持久。防静电环氧地坪有这么多的优点,难怪大家都在电子厂内选择铺装上皇家地坪的防静电地坪了呢!

    Anti-static floor has all the excellent performance of epoxy floor, can quickly discharge electrostatic charge, anti-static lasting effect, surface resistivity of 106_-109_, ground resistance discharge in line with international GB 6650-86A standards. The anti-static floor is seamless as a whole, which can be dust-proof, tough and wear-resistant, impact-resistant, heavy pressure-resistant, corrosion-resistant, solvent-resistant, smooth and bright, free of coloring, easy to clean up, maintenance, and long service life. It can prevent and eliminate static electricity, electromagnetic wave generation, interference and destruction, and antistatic effect is lasting. Anti-static floor has so many advantages, no wonder everyone in the electronics factory choose to pave the Royal floor of anti-static floor!

    那么关于防静电地坪施工的注意事项有哪些呢?

    So what are the precautions for anti-static floor construction?

    1、环氧防静电地坪涂刷前要将被涂底材处理干净之后才可以进行后续步骤。

    1. Before the epoxy anti-static floor is painted, the coated materials should be cleaned before they can be followed.

    2、要避免在低温高湿的条件下施工。

    2, avoid construction under low temperature and high humidity conditions.

    3、施工时可根据施工需要添加专用稀释剂稀释,添加比例为5-20%。

    3. During construction, special diluents can be added according to construction needs, and the dilution ratio is 5-20%.

    4、双组份材料混合后,应在短时间内施工。

    4. After mixing two component materials, they should be constructed in a short time.

    5、应根据基材平整度状况和使用要求,确定涂层厚度。采用越厚的涂装系统,涂层载重越大,涂层应越厚,如涂层过薄,使用过程中易损坏。

    5, the thickness of the coating should be determined according to the smoothness of the substrate and the requirements for use. The thicker the coating system is, the greater the load of the coating, the thicker the coating should be. If the coating is too thin, it is easy to be damaged in use.

    6、施工后要加强排风排出气味,待充分保养后,才能投入使用。

    6, after construction, we must strengthen the exhaust air to discharge the odour, so that it can be put into use after full maintenance.


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】