Floor refers to the use of specific materials and processes for the construction of plain land treatment, and presents a certain degree of decorative and functional ground. Common are epoxy self-leveling floor, diamond wear-resistant floor, tin-titanium muffled floor, fluorosilicon elastic floor, epoxy terrazzo floor, silicon PU floor and so on. With the increasing popularity of the floor, the scope of its use is more and more extensive. Whether it is industrial or commercial establishments, we can see the figure of the terrace. So the question is, if you want to lay a floor for your own factory at this time, facing a variety of destination types, how should you choose? The proposal for small floor can be considered from the following 7 aspects.
1. Make budget beforehand.
No matter what kind of floor you want to build, you should first make a good cost estimate. The choice of floor materials within the budget will not be overrun, and it may also save costs.
2, we must consider the needs of factory production and operation.
Different factories have different floors. When choosing the floor, the choice of performance should focus on different floors according to the daily needs of the use of the site.
Emery abrasion resistant floor
For example, heavy machinery factories with forklift trucks have great requirements on the wear and compression resistance of floors. The small edition will recommend the use of diamond abrasion-resistant floors. Chemical factories filled with chemicals and solvents require strong corrosion resistance and acid and alkali resistance. Royal floors will be a good choice for strong acid and alkali resistance. Light industrial factories such as textile mills, food factories and other suitable floor must have a certain degree of cleanliness, epoxy self-leveling floor can meet this demand.
There are also some special areas, such as anti-skid, explosion-proof, anti-static and other preventive facilities. When selecting ground materials, we should give full consideration to the special properties of the selected floors.
Anti static floor.
3, we must give full consideration to the construction environment.
The quality of floor construction is affected by many comprehensive factors, including the temperature and humidity of the construction environment. If the temperature is too low, it is difficult for many two-component coatings to carry out curing reaction; if the temperature is too high, the consistency of the coatings will be increased, the dry knot will be scrapped, and the explosive polymerization will occur if the temperature is too high. When humidity is too high, it is easy to appear whitening, blistering, drumming and cracking. Therefore, when choosing the floor, you need to determine whether you need moisture-proof treatment or select special moisture-proof floor according to the location of the construction site in the basement floor or the ground floor.
4. Prime land conditions
The basic condition of plain land is also a factor to be considered before choosing the floor. The service life of the floor will be seriously affected by the condition of the floor base. The general base strength is greater than or equal to 20Mp to build the floor. The flatness should be within 3mm/3m, and the uneven floor will use the epoxy mortar floor.
5, consider the aesthetic factors.
Whether it is a practical route to the factory workshop or tall leisure clubs, different occasions, the pursuit of different decorative effects. Only by considering the beauty of the floor can we create the most suitable ground. For example, in the driveway and the court, to ensure that the eye when driving or kicking is comfortable enough, choose the floor to consider its color, brightness and pattern. Commercial premises should also be constructed according to the specific decoration and decoration so as to achieve the unity of the overall style.
6, safety requirements
About the safety requirements, mainly some special places implied some hidden safety hazards, owners need to take this factor into account when choosing the floor. For example, where there is oil and water at the ramp or the ground, it is necessary to choose the floor with skid resistance.
7, other factors to be considered
Sometimes even under the same environment, the factors to be considered or the construction standards required are different. Therefore, when we choose the floor, we still need specific environment, specific purposes, and specific analysis.
With the evolution of the times, the floors have attracted much attention because of their excellent practicability and decoration, and the types and functions of the floors are increasingly diversified. Only by considering all the factors and choosing the right floor materials can we maximize the advantages of the floor. Worry about construction before construction.
标签:   环氧地坪 地坪 环氧地坪施工 环氧地坪漆