How to start the sand from the cement floor? At present, due to the long use of the ground, or has not been dealt with on the ground, so there are some problems, such as ground sand, ground sand, ground ash, ground ash, ground there are many pits, ground crust and many other problems. Ordinary cement concrete old ground, after a few years of general use, under the action of forklift, the ground will appear varying degrees of ash, sand, shell, cracking, empty drum phenomenon. With the growth of service life, coupled with carbonization, water erosion and weathering, the surface of the floor will continue to powder, affecting normal use.
Mainly manifested in the surface rough, not solid, walking after the surface of loose cement, hand touch when the cement surface dried.
Sand grains loosen or pieces of cement crust peel off when walking many times, which belongs to the surface of the sand, some with a small drop knocking on the ground when there is empty drum sound, in the gravity after cracking, which seriously damaged the use of the ground function.
There are different degrees of ash, sand, and shell phenomena on the new concrete floor and the wear-resistant floor.
All indoor and outdoor concrete floors (as long as containing cement). All can harden.
It is necessary to make the epoxy floor of loose overturned sand concrete floor, concrete floor hardness is not enough, floor paint is easy to fall off, need to improve the strength of the cement floor.
Based on the above situation and the existing construction experience, we propose the following solutions to these questions. Cement floor dust can be used as epoxy floor paint. If you have any questions about the above methods, please call us.
标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工