Epoxy floor construction for different landscapes, such as where? Floor manufacturers have always been committed to the production and sale of epoxy floor, wear-resistant floor, under the ground for the epoxy floor for the land to open explanations: Epoxy floor construction of the land is basically divided into: new concrete land, used old cement land, water mill There are different ways to deal with different types of land, such as stone tiles. The general process is as follows.
New concrete land. Choose at least C30 above concrete pouring, so that the strength of the land structure can reach above C25-30. In concrete pouring site, if not laying waterproof film, should sprinkle water to keep the foundation moist. Cement surface should be poured along with concrete, and directly with the machine, can not be plastered.
After the surface is finished, it needs to be dried up and cured for 28 days in winter, which can be reduced to 20 days. During the sprinkler curing time, the surface moisture should be maintained for at least 14 days.
Old cement land used. Old cement land, if not contaminated by oil, acid and alkali erosion, can follow the Lida Hongye Floor Loading Co., Ltd. corresponding epoxy resin floor coating system pace of construction; if contaminated by oil, acid and alkali erosion may be used to paint the old land, must be completely eliminated. General dirt, grease, paint, with a large grinder will completely grind the lower layer flat, clean, so that the land arrived at the construction requirements.
Terrazzo tiles and other types of land: terrazzo tiles for the lower floor of the land, to the end of the intensity of grinding, wool, vacuum, with the Lida brand epoxy resin primer as the basic layer of epoxy process, loose tiles must knock off, and then make up for the epoxy mortar grinding flat, and then implement the next coating process.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工