欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    厂家揭示环氧地坪施工应该注意的事项

    2018-10-19 10:13:45 无锡盛发地坪科技有限公司 阅读

    环氧地坪厂家共享环氧地坪施工注意事项:基面办理打磨、修补、干净陆地,使基面抵达无空鼓、开裂、砂眼、坑洞、起壳以及油污等.2、环氧底涂涂装环氧树脂渗入紧闭底涂按比例把主剂与固化剂夹杂,充分搅拌平均,在运用时光内滚涂涂装,涂装做到要薄而匀,涂装后有色泽,无色泽之处,在适度时实行补涂.

    Epoxy Floor Factory Sharing Epoxy Floor Construction Notes: the base surface for grinding, repairing, clean land, so that the base surface to no holes, cracks, sand holes, holes, shelling and oil stains, etc. 2, epoxy primer coating epoxy resin infiltration close primer in proportion to the main agent and curing agent, fully mixing average, in service time Internal roll coating should be thin and uniform, colored and colorless after coating, and supplementary coating should be carried out when appropriate.

    环氧沙浆中涂涂装:批刮粗石英沙浆层:先将环氧树脂中涂主剂充分搅拌平均,按比例把主剂与固化剂夹杂,充分搅拌平均,夹杂时将固化剂从主剂的桶中心倒入,防止原料夹杂不均.搅拌后,再配比适量4﹟-6﹟的粗石英砂,选用刮刀刮涂工艺弥补找平基面.

    Coating in epoxy mortar: batch scraping coarse quartz mortar layer: first of all, the epoxy resin coated in the main agent fully stirred average, according to the proportion of the main agent and curing agent inclusions, full stirring average, inclusions will be curing agent from the center of the main agent into the barrel to prevent uneven inclusions in raw materials. The process makes up for the leveling base.

    批刮细石英沙浆层:在夹杂好的环氧树脂中涂配比适量6﹟-8﹟的细石英砂,相同选用批刀批刮,进一步增添中涂层的耐压及抗冲击性能.根据环氧地坪设计厚度屡次批刮可反复工序,待沙浆中涂层固化后打磨、吸尘干净.

    Batch scraping fine quartz mortar layer: in the inclusion of good epoxy resin coated with a suitable proportion of 6 # - 8 # fine quartz sand, the same selection of batch knife scraping, further increase the pressure and impact resistance of the coating. According to the design thickness of the floor can be repeated batch scraping process, after the coating solidified in the mortar grinding, dust cleaning.

    环氧腻子中涂涂装先将环氧树脂中涂主剂充分搅拌平均,按比例把主剂与固化剂夹杂,充分搅拌平均,夹杂时将固化剂从主剂的桶中心倒入,防止原料夹杂不均.搅拌后,再配比适量石英粉批刮弥补、紧闭沙浆层的砂眼、毛细孔光滑基面,使环氧面涂施工抵达雅观、平坦.

    In the epoxy putty coating, the main agent in the epoxy resin is fully stirred evenly, the main agent and the curing agent are mixed in proportion, and the curing agent is fully stirred evenly. When the inclusion occurs, the curing agent is poured into the center of the barrel of the main agent to prevent uneven inclusion of the raw material. The epoxy surface is applied to construction to arrive at elegant and flat.

    环氧自流平面涂涂装将无溶剂环氧树脂自流平面涂主剂充分搅拌平均,按比例把主剂与固化剂夹杂,充分搅拌平均,夹杂时将固化剂从主剂的桶中心倒入,防止原料夹杂不均.充分搅拌平均,倒于陆地上,用专用带齿镘刀镘刮涂装,先办理墙脚及犄角,再合座镘涂一道.涂装时发觉砂粒可杂物赶紧拣出,免得波及表观功效.

    In epoxy self-flowing surface coating, the main agent of solvent-free epoxy resin self-flowing surface coating is fully stirred evenly, and the main agent and the curing agent are mixed in proportion, and the curing agent is fully stirred evenly. When the main agent is mixed, the curing agent is poured in from the center of the barrel to prevent uneven inclusion of raw materials. The foot of the wall and the corner of the bamboo flute are coated together with the seat. The sand grains can be quickly picked out so as not to affect the apparent effect.


    标签:   环氧地坪 环氧地坪漆 环氧地坪施工 地坪
    无锡环氧地坪 技术支持:【易商科技】