The strength of concrete ground itself is not up to standard, the base surface is loose, and there is ill condition like sand and powdering. This has a great relationship to the unit consumption of paint, often in such a defective ground on the construction of epoxy floor coating, its material consumption is 1-3 times the normal base! At the same time, the cost of labor has also increased. Therefore, a defective surface, the same process thickness, the unit price will increase a lot. This is also one of the reasons for professional floor lacquer merchants to make field investigation before the transaction.
Old ground renovation: Old ground is often low in strength, immersed in oil (or other corrosive media), damaged and other problems. The situation here is more complex, but also the need for professional field surveys, depending on the situation will also increase the cost of square rice. Even some of the worse damaged old floors can only be smashed down and re-made to the concrete surface before the epoxy coating can be applied. Flatness: Some enterprises, such as precision machinery, microelectronics, air cushion transport facilities, etc., have higher requirements for the ground flatness of the production site; then we must first measure the plain land to achieve the flatness, and combined with the construction of the numerical calculation of unit price. Obviously, the worse the smoothness of plain ground, the higher the required smoothness after construction, and the higher the cost of plain rice. The gap is basically filled with resin material. Material factor: This is an invisible factor, the customer often can not judge; Personally, I think the field proofing is a good method: to take the model effect as an important basis for future acceptance.
Area selection: A factory building can be divided into several areas according to its function, such as operation area, finished product area, semi-finished product area, logistics area, etc. Therefore, the choice of thickening coatings in areas such as corridors, other areas with low wear rate, thin coating is also an economic overall construction scheme. Of course, if you have different colors in different areas, the difficulty of our construction and material loss will increase. Business factors: such as the size of the project, what kind of payment conditions, whether one-time construction, whether there is cross-construction during the period, the length of the warranty period and so on.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工