Epoxy floor is a thin layer of film attached to the concrete foundation, in order to maintain its performance better, first of all should be guaranteed that the floor paint can adhere to the concrete with good adhesion, the two can not be strong bond together, there is no scattered phenomenon, so we must strictly control between the two. The key factors affecting the bond between epoxy floor and concrete can be divided into two parts: the condition of concrete base and the condition of epoxy floor.
Porosity: As a kind of porous land, the capillary inside the concrete is suitable for the dipping of floor paint, the better the penetration of floor paint, the better the bonding performance of the two, so usually the old concrete land, the more it is applied to the base of the rest of the cover, must be fully polished to make it have a certain roughness and clumsiness After the opening of the land, the construction will be carried out.
Moisture Content: The lower the moisture content of the concrete base surface, the better the bonding performance. Solid land. Land too loose, will make the floor paint and the base no bonding force. Therefore, before the construction of all loose layer to remove.
Epoxy Floor Material Conditions: Curing Reaction. Floor Coatings are reactive curing coatings. The amount of heat released during the reaction and the temperature at which it occurs have a great impact on the curing performance of the floor coatings. Among them, curing agent is the key factor affecting the curing temperature, so it is necessary to cover the adhesion between the epoxy floor coatings and the substrate. Be sure to choose suitable curing agents.
Construction technology. If the bonding force between the local floor paint and the base is not timely, the floor will be scattered, and the most useful way to prevent the scattering is to be careful with the management of the base, sure that there is a suitable rough, dry form in the base before the floor construction.
标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工