Epoxy floor is a kind of high strength, wear-resistant, beautiful floor, with seamless, solid texture, good resistance to antisepsis, dust, easy maintenance, low maintenance costs and other advantages. But the epoxy floor is partially dry after the construction is completed, causing great trouble to the users. Why does the epoxy floor tile partially dry? How should we prevent it?
There are 4 reasons why the epoxy floor is dry or partially dry after construction.
1, the temperature is too low or the temperature is too high to react completely.
2. The proportion of main agent and hardener is incorrect or no hardener is added.
3, hardening agent is wrong.
4. When the main agent is mixed with hardener, it is not stirred evenly.
How to prevent or prevent partial failure after completion?
1. Avoid low temperature and humidity conditions. Low temperature should be selected for hardening agent at low temperature.
2, the main agent and hardener must be proportionally mixed.
3, hardener can not be used.
4. The main agent and hardening agent must be fully stirred and constructed.
Local non-drying of epoxy thin-coated floor has a great impact on users, will delay the use of time can not be normal, delayed workshop working time, has been non-drying greater impact, I hope the above reasons for local non-drying of epoxy thin-coated floor and prevention methods are helpful to everyone, do not appear epoxy floor local non-drying problem.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工