Epoxy floor is a new type of decoration materials, with environmental protection, energy saving, anti-corrosion, moisture-proof and other advantages are accepted by people. We all know that the epoxy floor will be particularly dirty after construction, this time it needs timely cleaning, if it is not clean or daily care, epoxy floor will soon be a problem. Therefore, daily cleaning and maintenance are very important. Let's take a look at what are the tips for daily maintenance of epoxy floor.
1. Epoxy floor should be used for 7-10 days after completion of construction. During the maintenance period, water or other solutions should be avoided to infiltrate the surface. When entering the workshop, employees must replace them with rubber soles (not wearing black shoes with foam bottom).
2. Floor use, production personnel are not allowed to wear nailed leather shoes and other hard soles on the walk, to prevent scratches.
3. All working appliances must be installed on a fixed special frame. It is strictly forbidden that metal parts with sharp corners collide with the ground, causing damage to the ground coating.
4. When installing equipment and other important objects in the workshop, the supporting points on the ground should be padded with thick rubber and other software materials. It is forbidden to use metal pipes and other towing equipment on the ground. The casters of all kinds of trolleys or trailers must be made of high wear-resistant polyurethane casters with wide force surface and certain elasticity. All kinds of trolleys or trailers should be as slow as possible when walking, and avoid brakes or sharp turns. Place a rubber pad or soft plastic pad on the floor of the machine operating table, heavy raw material, semi-finished product or finished product storage area.
5. Epoxy floors can only withstand temperatures up to 80 C. Steel plates or other high-temperature isolation pads should be laid on the ground for areas that often require welding or oxygen cutting. When welding and other high-temperature operations are carried out in the rest of the workshop, refractories such as asbestos cloth should be used as auxiliary pads in places where sparks may spatter to prevent the coating from burning out.
6. If wear or scratch occurs due to long service time, once the floor is damaged, timely use of paint to repair, small areas can be partially repaired, if the area is larger, it is recommended to roll coating again, so as to avoid oil dirt penetrating through the damage to the epoxy floor.
7. All hardware: such as iron chairs, iron tables, iron shelves, etc., must be their feet with soft plastic, rubber wrapped or padded with paper to avoid scratching the ground during use, tractor pull need to fully lift the board off the ground, turn the corner please pay special attention not to scratch the ground.
标签:  环氧地坪 环氧地坪漆地坪 环氧地坪漆 地坪 环氧地坪养护