Epoxy floor paint has the characteristics of strong acid and alkali resistance, wear resistance, pressure resistance, impact resistance, mildew resistance, waterproof, dustproof, anti-skid, anti-static, electromagnetic wave and so on. It has bright colors and is easy to clean. Widely used in electronics factories, machinery factories, hardware factories, pharmaceutical factories, automobile factories, hospitals, aviation, aerospace bases, laboratories, offices, supermarkets, paper mills, chemical plants, plastic processing plants, textile mills, tobacco factories, confectioneries, breweries, beverage factories, meat processing plants, parking lots and other surface coating. How to apply epoxy floor paint? And how to apply and maintain epoxy floor paint? Many people want to understand the problem, let us now to understand, hope that through the following introduction, can help you.
Specific construction methods of epoxy floor paint:
1. Vegetable land treatment: generally in the vegetable land needs to be cured for more than 28 days, and to ensure that the plain land to cement flour or grindstone as the standard, no oil pollution, smooth and clean ground.
2. Primary coatings: This stage is generally guaranteed to be completed in four hours, the main agent and hardener needed to be fully mixed, of course, according to the actual situation to adjust the viscosity. At this stage, we need to maintain health for more than eight hours.
3. Intermediate coating: This stage is mainly to add quartz sand, and uniform coating, this stage needs to be completed in half an hour of construction, curing time for more than eight hours.
4. Surface coating: to ensure that the ground is clean, and in accordance with the correct proportion of mixing the main agent and hardener, half an hour to complete the construction, this stage mainly use the drum or trowel to evenly coat the material, generally 24 hours after the completion of the people. In the use of epoxy floor paint in the construction process should pay attention to the construction site temperature and humidity, pay attention to the surface treatment of the floor, after the completion of construction, pay attention to the maintenance of construction equipment and tools, paint.
Epoxy floor paint curing:
1. The ground should be maintained for 7-10 days before it can be put into use. During the maintenance period, water or other solutions should be avoided to soak the surface.
2, anyone entering the workshop must have rubber shoes (not wearing black shoes with foam bottom).
3. Hardware such as iron chairs, tables and shelves should be wrapped in soft plastic or rubber or padded with paper to avoid scratching the ground during use.
4, the tractor needs to fully lift the machine board from the ground. When turning, please pay special attention to the angle of the machine plate and not to scratch the ground.
5. Clean the floor with a soft mop or a dry-wet dual-purpose vacuum cleaner. Clean with clean water or detergent, but pay attention to the wet and slippery ground.
6. If wear or scratch, small area can be repaired due to long service time, if the area is large, it is recommended to re-roll 7. Before the equipment enters the factory, lay cardboard boxes on the floor to avoid scratching the ground in the process of transportation equipment.
8. The wheels of the cart should be rigid or elastic, and be used separately inside and outside the workshop.
9, waxing can be done according to the ground requirements (the effect can prevent ground scratches).
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工