Epoxy mortar floor has the advantages of high strength, abrasion resistance, beautiful and durable, no seam, solid texture, good resistance, anticorrosion, dustproof, easy maintenance, low maintenance cost, etc. It can also be added according to the needs of anti-static, conductive static electricity, anti-skid and other characteristics. Next we will know about epoxy mortar floor paint and floor maintenance.
Epoxy mortar floor
1. Epoxy resin mortar floor paint:
Performance characteristics: excellent resistance to impact, good hardness, high load and wear resistance after film forming. Seamless, dust-proof, moisture-proof, anti-corrosion, anti-static, anti-mildew; acid, alkali, salt and other chemical solvent corrosion.
It can be used as anti slip ground, matte or high gloss ground. Load pressure, impact resistance, excellent mechanical properties, oil stain resistance, resistance to general chemical corrosion hardening shrinkage rate is small, no cracks, can withstand certain moisture.
适用范围:机械性能要求高的区域,机械厂、五金厂、码头、车道、汽车飞机 修理厂适用于重工业地坪,要求耐磨性能强,耐冲击性的电子、机械、通讯设备、仪器仪表、食品、饮料、医药、化工、造纸 、烟草、塑料、文体用品等制造车间地面,特别需要跑叉车、汽车、重手推车的停车场 、仓库等走道。以及其它有重机械行走之场所的洁净耐磨地坪,或旧地面、粗糙地面的翻新。
Scope of application: Mechanical factory, hardware factory, wharf, driveway, automobile and aircraft repair factory are suitable for heavy industrial floor, which requires strong wear resistance and impact resistance of electronic, mechanical, communication equipment, instrumentation, food, beverage, medicine, chemical industry, paper making, tobacco, plastics, cultural and sports articles, etc. The floor of the workshop is especially needed to run forklifts, cars, heavy carts, parking lots, warehouses and other walkways. And other heavy machinery walking places of clean and wear-resistant floor, or old ground, rough surface renovation.
Epoxy mortar floor
Precautions for epoxy mortar floor maintenance:
1. The floor should be maintained for 7-10 days before it can be put into use. During the maintenance period, water or other solutions should be avoided to soak the surface.
2, anyone entering the workshop must have rubber shoes (not wearing black shoes with foam bottom).
3. Hardware such as iron chairs, tables and shelves should be wrapped in soft plastic or rubber or padded with paper to avoid scratching the ground during use.
4, the tractor needs to fully lift the machine board from the ground. When turning, please pay special attention to the angle of the machine plate and not to scratch the ground.
5. Clean the floor with a soft mop or a dry-wet dual-purpose vacuum cleaner. Clean with clean water or detergent, but pay attention to the wet and slippery ground.
6. If wear or scratch occurs due to long service time and small area can be repaired locally, if the area is large, it is recommended to roll again.
7, before entering the factory, lay the bottom of the floor with cardboard boxes, so as not to scratch the floor during transportation.
8. The wheels of the cart should be rigid or elastic, and be used separately inside and outside the workshop.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧树脂砂浆地坪