The choice of epoxy flooring for factories is to satisfy the use conditions first and to be durable again, because renovation for factories means that production will be affected. Secondly, the price is appropriate. These three are also related. How to deal with the factory floor is a topic that many people are concerned about. Epoxy flooring, curing agent flooring or diamond abrasion resistant flooring? For industrial workshops, the most suitable and best floor is durable, which can satisfy the use conditions of the factory. Following is around these three aspects, to say what the factory floor to do epoxy flooring is good. 有特殊需求的地面，当然以满足特殊需求为主，如果地面对于温度有要求，需要耐高温冲洗，或低温冷冻环境，像食品厂、肉联厂、薯片厂等，以及需要耐酸碱腐蚀，像化学实验室等，推荐使用性能强大的聚氨酯砂浆地坪，但材料造价高，成本较高。聚氨酯环氧地坪属于高端环氧地坪材料。
Surface with special needs, of course, is mainly to meet special needs. If the ground has temperature requirements, it needs high-temperature washing or low-temperature freezing environment, such as food factories, meat joint factories, potato chips factories, as well as acid and alkali corrosion resistance, such as chemical laboratories, it is recommended to use polyurethane mortar floor with strong performance, but The material cost is high and the cost is high. Polyurethane epoxy flooring belongs to high-end epoxy flooring materials.
If the requirements for uniformity and consistency of the ground are high, the pursuit of the beauty of the ground, or the requirements for the color of the ground, performance, strength and hardness are not very high, the use of loose ground environment, generally recommended epoxy floor. The price of epoxy flooring is better, but its durability is poor, peeling or damage will occur, and local wear and tear will occur. Epoxy flooring is a mature epoxy flooring material on the market.
If it pays attention to the performance of the ground, the surface effect requirements are not high, you can choose concrete sealant curing agent floor. The solidified floor not only increases the hardness and strength of the ground, but also keeps the ground from sand and ash, which is more conducive to maintenance.
The hardness of the ground before solidification and polishing is 2, and the hardness of the solidified ground is more than 7.
The stable calcium silicate compound is formed after the concrete ground is solidified and polished, which forms permanent protection, prevents the ASR silicon adverse reaction of concrete, prevents the aging and weathering of concrete, and increases the service life of concrete. The compactness of concrete increases, the appearance of cracks in taxable concrete increases the compressive and wear resistance of concrete.
After grinding by machine, mirror effect is formed, which not only makes the concrete ground beautiful, but also reduces the friction coefficient of the concrete surface and increases the service performance. At the same time, the solidified concrete blocks the saline-alkali precipitation from the ground, which has the effect of preventing flooding and skidding.
The most important thing is that the more the ground is used, the more natural and shiny it will be.
So the concrete sealing and curing agent floor is a floor with high cost performance and good performance for factory floor.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪 地坪施工