Before the construction of epoxy floor, we must adopt certain methods to eliminate or decrease these three factors, so as to prevent the unsafe construction quality caused by these factors during construction. Otherwise, the construction cost will be wasted and the construction time will be delayed. In order to ensure the construction quality of epoxy floor, the first thing to do is to carry out construction according to the correct construction process. At the same time, the factors that can affect the construction quality should be reduced to the minimum or eliminated, and then the construction quality of the epoxy floor can be guaranteed more greatly. So what are the factors that can affect the quality of construction?
1. The influence of external environmental factors:
Epoxy floor paint requires high temperature conditions of construction environment, and can not be constructed at too low or too high temperature.
2. The influence of temperature on epoxy floor construction:
In epoxy flooring, it is difficult for two-component coatings to solidify at temperatures below 5 degrees. Perhaps the reaction is very slow, and then the time of film formation extends greatly. Perhaps it can not be solidified.
3. The influence of humidity on epoxy floor construction:
According to the construction requirements of epoxy flooring, when the relative humidity of air is higher than 85%, the construction of epoxy flooring can not be carried out, because of the shortcomings of whiteness and cracks.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪