How to correctly renovate and repair the epoxy floor? The steps of correctly renovating the epoxy floor are introduced in detail. The first step is to clean up the old floor. When we are renovating the epoxy floor, we should remember to clean up the old epoxy floor, where we will use professional epoxy wear equipment to clean up the old epoxy floor. This step will be used by any company. After that, we construct according to different kinds of epoxy floor. 第二步：对环氧地坪上面的油污进行清理。有很多污垢的话，我们就无法进行进一步的施工。我们用清洗剂进行清理，脱油，脱脂，确定表面干净后再进行施工。
Step 2: Clean up the oil on the epoxy floor. If there is a lot of dirt, we will not be able to carry out further construction. We use detergent to clean, degrease, degrease and make sure the surface is clean before construction.
Step 3: Repair cracks on older floors. If the construction quality and materials of the original epoxy floor are poor, it will often lead to many problems. For example, cracks. When we find cracks, we use a cutting machine to cut the cracked ground into V slots, then pour some epoxy mortar into it, and then we smooth the ground.
Step 4: Deal with pits. Poor epoxy floors usually bulge up, and there will be pits at the same time. When we find this situation, we can use a grinder to grind them. Of course, if the pits are larger and more, we must contact the builders and ask them to rework.
What are the causes of cracking and crushing of wear-resistant floors?
The crushing reason of wear-resistant floor:
1. Label or insufficient content of cement
2. Quality Problems of Wear-resistant Materials
3. Inadequate maintenance of floors
The crushing prevention of wear-resistant floor:
1. Let the concrete contractor and the diamond wear-resistant construction unit communicate deeply before construction to avoid the floor powdering caused by insufficient cement label or content.
2. Selecting Wear Resistant Floor Material
3. Arrange regular maintenance of fixed personnel after completion of construction
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪 环氧地坪翻新