Epoxy floor paint is widely used in factories and underground parking lots. The following epoxy floor paint manufacturers will introduce the construction steps and scope of application. The construction steps of epoxy floor paint are as follows: 1. Primer. After finishing and cleaning the concrete base material, primer (roll or brush), roll or brush should be applied. This primer has the necessary water vapor permeability function, which can strengthen the strength of the base material and increase the adhesion of the coating to the base material. 2. Intermediate coating. Quartz sand and quartz powder are added to the prepared epoxy coating (Intermediate coating) to prepare water-borne epoxy slurry, which is uniformly coated with a trowel knife to increase the thickness and compressive strength of the coating. 3、批补.中涂后用砂纸打磨环氧地坪,并用环氧涂料(中涂)以及石英粉配成的腻子依现实需求施工数道,条件抵达平坦无孔洞,无批刀印和砂磨印为准.
3. Batch repairing. Sand paper is used to polish the floor after middle coating, and putty made of epoxy paint (middle coating) and quartz powder is constructed several times according to the actual needs. The condition is that the floor is flat without holes, and no batch knife prints and sanding prints shall prevail.
4. Surface coating. Two rolls of epoxy floor coating are used. After completion, the floor is smooth, gentle, clean, uniform in color and no empty drum.
5. Maintenance. The practical demand for surface layer is 24H. During this period, it should be closed, which is better than the effect of oral cleanliness and smoothness.
Scope of application of epoxy floor paint:
1. Suitable for non-heavy industrial plants, such as electronics, electronic machinery, chemical industry, medicine, textile, clothing, tobacco and other industries;
2. All cement or terrazzo floors in warehouses, supermarkets, parking lots and other special places;
3. Dust-free walls and ceilings with purification requirements.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪