In public life, epoxy floor can be seen everywhere, epoxy floor to use the paint is very common, for the advantages of epoxy floor paint? And how to use epoxy floor paint? Many people want to understand the problem, let us now to understand, I hope the following introduction can help you. . Advantages of epoxy floor paint: base surface treatment: grinding the base surface, clean the ground, repair flattening defects and base surface smoothness, clean and dry;
Anti-corrosion primer: mainly using penetration and strong adhesion, so that the epoxy primer roll one way, enhance the adhesion of the foundation surface and anti-corrosion coating, seal the moisture and moisture under the base, but also has a good waterproof effect;
Laying glass fiber cloth: glass fabric should be placed in a flat state, and then coated with a good epoxy blend will be glass fabric adhered to the ground, and batch knife in epoxy coated flat, so that uniform coating, enhance the ground toughness, as required to do one layer to suppress to three layers;
Putty layer: quartz sand or double fly powder is prepared with epoxy anti-corrosive intermediate coating material to scrape a lot of putty layer, and two to three layers are constructed according to the need, so as to achieve smooth and hollow surface coating construction.
Anti-corrosive topcoat construction: use epoxy anti-corrosive topcoat flat scraping one or two times, with teeth rolling hole defoaming, smooth surface, no harmful defects, hanging phenomenon.
The construction steps of epoxy floor paint are as follows:
1. Vegetable land treatment: generally in the vegetable land needs to be cured for more than 28 days, and to ensure that the plain land to cement flour or grindstone as the standard, no oil pollution, smooth and clean ground.
2. Primary coatings: This stage is generally guaranteed to be completed in four hours, the main agent and hardener needed to be fully mixed, of course, according to the actual situation to adjust the viscosity. At this stage, we need to maintain health for more than eight hours.
3. Intermediate coating: This stage is mainly to add quartz sand, and uniform coating, this stage needs to be completed in half an hour of construction, curing time for more than eight hours.
4. Surface coating: to ensure that the ground is clean, and in accordance with the correct proportion of mixing the main agent and hardener, half an hour to complete the construction, this stage mainly use the drum or trowel to evenly coat the material, generally 24 hours after the completion of the people. In the use of epoxy floor paint in the construction process should pay attention to the construction site temperature and humidity, pay attention to the surface treatment of the floor, after the completion of construction, pay attention to the maintenance of construction equipment and tools, paint.
标签:   环氧地坪 无锡环氧地坪 环氧地坪施工 环氧地坪漆 地坪