欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    分析防静电地坪漆施工时要注意哪些问题?

    2019-08-27 22:35:31 无锡盛发地坪科技有限公司 阅读

    代工业不断向电子化、自动化发展,一些高科技型企业和实验室对地面的要求极高,因此环氧防静电地坪漆的应用也越来越广泛,环氧防静电地坪不仅具有防静电功能,还有高耐磨和抗冲击性,环氧防静电地坪广泛运用于电讯、通讯厂房,手术室,机房等特殊场所。环氧防静电环氧地坪漆施工要求很高,在施工过程中应注意以下几点:

    With the development of modern industry towards electronics and automation, some high-tech enterprises and laboratories have very high requirements for the ground. Therefore, the application of epoxy antistatic floor paint is more and more extensive. The epoxy antistatic floor not only has antistatic function, but also has high wear resistance and impact resistance. The epoxy antistatic floor is widely used in telecommunications. Communication workshop, operating room, computer room and other special places. The construction requirements of epoxy anti-static floor paint are very high. The following points should be paid attention to in the construction process:

    1.基层处理,在环氧地坪设计时就应该明确对基层的要求,如平整度、强度、防水、分格缝和接地系统等,保证基础工作坚实。

    1. Basic treatment, in the design of the floor, should be clear about the requirements of the basic level, such as smoothness, strength, waterproof, partitioned joints and grounding system, to ensure that the foundation work is solid.

    2.环氧防静电耐磨地坪返工、翻新和维修的成本高,应尽量将基层工作做到最好好,不留隐患,保证环氧防静电地坪质量。

    2. The cost of rework, renovation and maintenance of epoxy anti-static and anti-wear floor is high. We should try our best to do the grass-roots work well and leave no hidden dangers to ensure the quality of epoxy anti-static floor.

    3.环氧防静电地坪漆施工前一定要进行全面的抛丸处理,以去除薄弱层,增加表面粗糙度,保证底漆的附着性能。

    3. Before the construction of epoxy anti-static floor paint, it is necessary to carry out comprehensive shot blasting treatment to remove the weak layer, increase the surface roughness and ensure the adhesion performance of the primer.

    4.选择质量符合有关标准要求的地坪漆。

    4. Choose the floor paint which meets the requirements of relevant standards. Jiangxi Meibang Company specializes in producing epoxy floor paint.

    5.施工配制涂料时不可随意加砂;自流平面漆的流动性要好,以保证涂膜厚薄均匀和涂层的装饰效果。

    5. Sand should not be added at will when preparing coatings. Self-flow flat coatings have good fluidity to ensure uniform thickness of coatings and decorative effect of coatings.

    6.应综合考虑接地系统,将地坪、设备和人员防护接地联系在一起,应单独接地,不可与防雷接地和其他配电系统共用接地系统。

    6. Grounding system should be considered comprehensively. Grounding system should be connected with ground floor, equipment and personnel protection grounding. It should be grounded separately. It should not be shared with lightning protection grounding and other distribution systems.

    7.基层的处理也可以考虑用高强自流平水泥进行补强加固;应正确选用嵌填分割缝用的材料。

    7. Base treatment can also consider strengthening with high-strength self-leveling cement. Material for filling and splitting joints should be selected correctly. 


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪
    无锡环氧地坪 技术支持:【易商科技】