Epoxy floor paint is a high-value, high-quality, high-demand product, the correct use of the method can make the ground as fresh as ever, and can prolong the service life. Specific suggestions are as follows: 1. Epoxy floor should be maintained for 7-10 days after completion of construction before it can be put into use. During maintenance, water or other solution should be avoided to infiltrate the surface.
2, anyone entering the workshop must have rubber shoes (not wearing black shoes with foam bottom).
3. All hardware, such as iron chairs, tables and shelves, should be wrapped in soft plastic, rubber or paper to cover their feet so as not to scratch the ground during use.
4. The tractor pull should lift the machine board off the ground sufficiently. When turning, please pay special attention to the angle of the machine board so as not to scratch the ground.
5. When cleaning the ground, please use a soft mop with good water absorption or a wet-dry dual-purpose vacuum cleaner, which can be cleaned with clean water or detergent, but please pay attention to the wet and slippery ground.
6. If wear or scratch is caused by long service time and small area can be repaired locally, if the area is large, it is suggested to re-roll coating once.
7. Lay cardboard boxes on the floor before the equipment enters the factory, so as not to scratch the ground in the process of transportation equipment.
8. Wheels of carts and slabs should be made of rigid or elastic rubber wheels, which should be used separately inside and outside the factory building.
9. Waxing can be done according to the requirements of the ground (its effect can prevent scratches on the ground)
标签:  地坪、 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪