Epoxy flooring manufacturer: wrinkle is caused by the sharp shrinkage of the inner layer and the surface layer during the drying process, resulting in the appearance of wrinkles or irregular linearity on the surface of the coating; fisheye is caused by the presence of foreign matter on the surface of the coating or mixed with the coating, which affects the uneven adhesion of the coating. The phenomenon of raw shrinkage reveals the coated surface; it is the phenomenon that many circular circles or needle-like holes like the pores of leather are formed after coating because of the rapid volatilization of solvent, which makes the paint solution too late to replenish. Parking lots, basketball courts, and especially dust-free workshops have widely used floor paint to process the ground. Again experienced construction team in the construction process will encounter various problems, below I will briefly summarize a few common problems.
Scraping of floor paint:
Hair blossom is a phenomenon that the color of the film is partially uneven, with spots, streaks and color disorders. Generally it is caused by improper application of coatings and deterioration of paint components.
The uneven density of the base surface or the insufficient dispersion of fillers will lead to the appearance of annular holes on the ground like non-oil-stained holes, which we call annular holes. The solution is to carefully inspect the base before the construction. If there are any problems, they need to be carefully dealt with before the epoxy floor paint can be constructed. Choose fillers with good dispersion and strengthen the management of material quality.
Seepage problem of floor paint:
Colour penetration refers to the phenomenon that when one coating is coated with another colour of paint, the bottom part penetrates into the surface coating and discolors the surface coating. The main reasons for bleaching are as follows: 1. the primer is dry, 2. the color difference between the primer and the top coat, 3. the primer is not primed or contains colored substances in the base material, 4. the primer contains organic pigments.
The defect of floor paint and the poor fullness of exposed floor paint are as follows:
Shedding is due to the phenomenon that the floor cracks lose the original adhesion to the substrate under the action of external forces, the film becomes a small part or the whole sheet is peeled off the surface: the problem of raw materials and construction reasons are that the bottom is not exposed and the fullness is not enough. In short, if you want to do a good job of epoxy floor paint, you must choose good materials and use professional construction team, because professional is the guarantee of quality.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪