欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪工程质量的检测标准及要求有哪些?

    2019-08-03 16:15:47 无锡盛发地坪科技有限公司 阅读

    环氧地坪漆工程的质量检测标准及要求,是为了保证环氧地坪施工能够达到最佳的效果而制定的。选择正确的材料、施工的规范、材料的合理运用是基础问题,可是需要引起我们重视的是人性化的服务和管理、科学合理的设计环氧地坪施工方案、专业的施工队伍、严格的质量监督等。有些比较大的环氧地坪公司一般选用涂料质量检测仪器来进行产品质量的检测和涂层质量的检测,可是仪器的价格偏高,一些小企业无力购置,所以,一些环氧地坪质量的检测标准和要求油然而生。例如,要求地面平整度在2M范围内且落差<2mm,含水量<6%等。

    The quality inspection standards and requirements of epoxy floor paint project are formulated to ensure that the construction of epoxy floor can achieve the best results. Choosing the right materials, construction specifications and rational use of materials are the basic problems, but what we need to pay attention to is humanized service and management, scientific and reasonable design of floor construction scheme, professional construction team, strict quality supervision, etc. Some of the larger epoxy flooring companies generally use coatings quality testing instruments for product quality testing and coating quality testing, but the price of the instruments is too high, some small enterprises can not afford to buy, so some flooring quality testing standards and requirements arise spontaneously. For example, the ground roughness is required to be within 2M and the drop is less than 2mm, and the water content is less than 6%.

    涂层的附着力是地坪涂装首要的检测项目。厚度<500μm,采用划格法(划格法:使用刀具切割涂膜,直到底材形成不同形状的划痕,再用胶粘带粘附后撕开,查看涂料的剥落情况,然后对涂膜的附着情况进行评级):刀刃间距为1mm,则厚度≤60μm;刀刃间距为2mm,则厚度在60~120μm;刀刃间距为3mm,则厚度≥121μm。

    The adhesion of coatings is the first test item for floor coating. When the thickness of the coating is less than 500 micron, the scratch method is adopted (scratch method: cutting the coating with a cutter until the substrate forms scratches of different shapes, then tearing them off with adhesive tape to check the peeling of the coating, and then rating the adhesion of the coating). If the distance between the blades is 1 mm, the thickness of the coating is less than 60 micron; if the distance between the blades is 2 mm, the thickness of the coating is less than 60 micron. When the blade spacing is 3 mm, the thickness is more than 121 micron.

    要求:

    Requirement:

    a.如果涂装地面处于底层,因为地下水位比较高,所以要做好防水处理;

    If the painting ground is at the bottom, because the groundwater level is relatively high, waterproofing treatment should be done well.

    b.如果要采用细石混凝土找平时,强度要高于C20,厚度要小于30mm;

    B. If fine stone concrete is to be used to find peacetime, its strength is higher than C20 and its thickness is less than 30 mm.

    c.如果施工工程中不能采用细石混凝土找平,可以用树脂砂浆或是聚合物水泥砂浆代替。

    C. If fine stone concrete can not be leveled in construction projects, it can be replaced by resin mortar or polymer cement mortar. 


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 地坪施工 无锡环氧地坪
    无锡环氧地坪 技术支持:【易商科技】