The main film-forming substances, pigments and other components of epoxy floor coatings are different, and their performances are quite different. Single floor coatings often can not meet the requirements of various indicators. In order to obtain a comprehensive performance floor coatings, it is necessary to reasonably select the bottom, middle and surface coatings to form a composite floor coatings. In order to ensure the bonding force between coatings of floor paint, make the best use of floor paint coating, and minimize the defects of composite floor paint coating, floor paint coatings of all layers must be matched. Guanglei floor paint provides you with matching principles for the rational use of epoxy floor paint coating. ①同种树脂的地坪漆涂料配套性最好，不同树脂的地坪漆涂料配套时，常出现一些弊病，需经过实验验证或理论分析。
The compatibility of floor paint with the same resin is the best. When the floor paint with different resins is matched, some disadvantages often occur, which need to be verified by experiments or theoretical analysis.
(2) It is best to match the drying primer with the drying topcoat, and the self-drying primer with the self-drying topcoat. The drying conditions of each layer of floor paint should also be consistent, so as to avoid the increase of brittleness caused by excessive cross-linking of floor paint.
(3) Coatings with the same hardness and strength have good compatibility. If the film hardness of the lower floor paint is too soft, it is easy to wrinkle and fall off.
4. Strong solvent topcoat is easy to bite the bottom of poor solvent resistance. If the distribution of pigments in this kind of bottom layer is increased, the underbiting phenomenon can be avoided.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧地坪翻新