Epoxy floor paint: It is usually composed of epoxy resin, solvents, curing agents, pigments and additives. There are many kinds of floor paint in this kind of paint. Such as solvent-free self-leveling floor paint, anti-corrosion floor paint, wear-resistant floor paint, anti-static floor paint and water floor paint. Its main characteristics are strong cohesion with cement base, water resistance and other corrosive media, as well as excellent physical and mechanical properties of coatings. What kinds of epoxy floor paints are there? What's the difference between them?
Effect drawing of epoxy floor paint
1. Epoxy floor paint:
Suitable for various factories, repair yards, stadiums, parking lots, warehouses, shopping malls and other ground sites.
A two-component epoxy sealing varnish consisting of epoxy resin, modified curing agent, solvent, etc.
Concrete base has high permeability, which greatly improves the strength of concrete base.
Excellent alkali resistance, good adaptability of concrete base.
High bond strength with concrete base can effectively resist back pressure caused by water vapor.
It is suitable for sealing primer of putty, masonry and concrete structure. It can also be used for sealing of hot spraying zinc, spraying aluminium and inorganic zinc-rich coating.
2. Epoxy polyurethane floor paint:
Polyether resin, polyether resin, acrylate resin or epoxy resin are used as component A.
Because the hardness of the coatings and the bonding force with the base are not as good as those of epoxy resin coatings, there are fewer varieties.
Mainly used in places with elastic floor paint and skid-proof floor paint.
3. Epoxy anti-corrosion floor paint:
In addition to its various strength properties, it can also withstand the corrosion of various corrosive media.
Suitable for various chemical plants, kerosene plants, sanitary materials plants and other ground coating.
4. Epoxy elastic floor paint:
Made of elastic polyurethane, the film has elasticity and walking comfort.
Suitable for all kinds of sports venues, public places and some factory workshop floor painting.
Photographic effect of floor paint in sunshine
5. Epoxy antistatic floor paint:
It can excrete electrostatic charge, prevent accidents caused by electrostatic accumulation, shield electromagnetic interference and prevent dust adsorption, etc. It can be used in various anti-static ground coatings.
Suitable for power plant, electronics plant workshop, pyrotechnics plant, computer room, etc.
6. Epoxy anti-skid floor paint:
The film has high friction coefficient and anti-skid performance, and is used for various ground coatings with anti-skid requirements.
It is a kind of good flat paint which is in the stage of rapid application and development. Used for all kinds of anti-skid ground coating.
Construction Technology of Epoxy Resin Floor Paint:
(1) The basic plain ground shall be cement flour or grindstone ground;
(2) The vegetable land should be kept in good health for more than 28 days, and the water content should be less than 8% before it can be removed if there is unevenness or empty drum in the construction of the vegetable land.
(3) Leveling the ground with epoxy;
(4) Oil contamination of plain land should be cleaned thoroughly.
1. Keep clean before construction. If there is any debris adhesion, remove the main agent and hardening agent according to the correct proportion and mix them fully.
(2) It takes less than 4 hours to finish the construction by adjusting the proper viscosity of the mixing material according to the ground conditions;
(1) Before construction, it is necessary to keep clean. If there is any debris adhesion, it is necessary to remove and mix the main agent and hardening agent according to the correct proportion and mix them fully.
(2) Quartz sand should be added to the mixed resin.
(3) Apply the material evenly with a trowel knife;
(4) It takes less than 30 minutes to complete the construction of mixed materials.
(5) Handover treatment should be done at the construction handover site;
_The curing and hardening time of the middle coating is more than 8 hours.
(1) Mix the main agent and hardener according to the correct proportion and mix them fully;
(2) Use batch knife to coat the material evenly;
(3) It takes 30 minutes to complete the construction of the mixed materials.
The hardening time of batch soil is more than 8 hours.
(1) Keep clean before construction and remove debris if they stick to each other.
(2) The main agent should be stirred evenly before use.
(3) Mix the main agent and hardener according to the correct proportion and mix them fully;
(4) It takes less than 30 minutes for materials to be uniformly coated and mixed by drum or trowel.
(5) Handover treatment should be done at the construction handover site.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪