Nowadays, with the development of science and technology, we have invented various kinds of epoxy floor materials. The epoxy floor with the advantages of anti-corrosion, dust-proof and easy maintenance is one of them. In our daily life, we use epoxy floor materials with corresponding characteristics according to the requirements of the site. Next we will "the use of epoxy flooring and related information" to understand in detail. Surface smoothness of base material. The smoothness of the substrate surface is the degree to which the surface of the substrate is uneven. It is advisable to measure the gap under the ruler with a 2m ruler and a plug ruler, generally under 3mm.
Base strength. Insufficient strength of the base surface will cause the epoxy floor coating and the base material to be pulled apart, or the whole ground will be damaged due to the stress damage of the base. The compressive strength of the base material is generally required to be greater than or equal to 25 MPa. Small hammers can be used to hit the grass-roots level. If there are empty drums, corresponding measures such as grouting must be taken to deal with them. 基层干燥程度。混凝土和砂浆地面中含有水分，会降低环氧地坪涂层与基层的粘结强度，另外也会引起涂层鼓泡或剥离现象。建议基层干燥时间一般要求28d以上。用含水率测试仪检测基面含水量，一般要求控制在6%以下。
Drying degree of base. The moisture content in concrete and mortar floor decreases the bond strength between epoxy floor coating and base layer, and also causes coating bubbling or peeling. It is suggested that the drying time of grass roots should be more than 28 days. It is generally required that the moisture content of the base surface be controlled below 6% by the moisture content tester.
On the surface of cement base, there are usually cement dust in construction, especially on the surface of newly constructed concrete. There are usually cement floating slurry (cement free body, loose, non-strength). There will be rust stains on the steel plate, which will affect the adhesion between the epoxy floor coating and the base layer, and need to be removed before construction.
[What are the functions and characteristics of epoxy floor?]
Epoxy floor is a kind of high-strength, wear-resistant and beautiful floor. It has the advantages of seamless, solid texture, good resistance to drug, anti-corrosion, waterproof, dust-proof, convenient maintenance and low maintenance cost. Epoxy flooring was originally used for functional flooring: such as anti-corrosion, wear-resistant, anti-skid, developed to general industrial flooring; besides functional requirements, it also has decorative effect.
Epoxy floors can be roughly divided into four types:
1. Epoxy flat-coated floor (common workshop dust-proof, low environmental requirements of the place).
2. Epoxy self-leveling floor (dust-free workshop, industrial production area with high purification requirements for workshop).
3. Epoxy anti-static floor (electronics manufacturing workshop with anti-static requirements).
标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工 南京环氧地坪