欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    如何正确制定环氧自流平地坪漆施工流程?

    2019-07-16 11:23:00 无锡盛发地坪科技有限公司 阅读

    环氧自流平地坪漆不同于其他系列的环氧树脂地坪涂料,停车场地坪漆等,这种材料的施工要求比较高,消费者如果找商家直接购买环氧地坪涂料外,还需要另外找施工队伍进行铺设,这其中如果出现环氧地坪质量问题,就很难判断是环氧地坪涂料供应商的问题,还是施工队伍的问题。也正因为自流平环氧地坪漆的施工要求比较高,因此大部分地坪漆厂家都会给客户制定环氧自流平地坪漆施工流程,如何制定自流平的施工方案就成了环氧地坪的关键所在。随着经济的快速发展,工业厂房的不断扩大,与之有牵连的建筑行业也得到了快速增长,自流平作为新型的地面装饰材料就深受各大消费者的喜爱,地坪漆厂家制定的环氧自流平地坪漆施工流程项目也越来越多。

    Epoxy self-leveling floor paint is different from other series of epoxy resin floor paint, parking lot floor paint and so on. The construction requirement of this material is relatively high. Consumers need to find another construction team to lay the floor paint in addition to the direct purchase of the floor paint by the merchants. If there is a quality problem of epoxy floor paint, it is difficult to judge. It is a question of epoxy floor coating supplier or construction team. It is also because the construction requirements of self-leveling floor paint are relatively high, so most of the floor paint manufacturers will formulate the construction process of epoxy self-leveling floor paint for customers. How to formulate the construction scheme of self-leveling floor paint has become the key to the epoxy floor. With the rapid development of economy and the continuous expansion of industrial plants, the construction industry associated with them has also been growing rapidly. Self-leveling, as a new type of floor decoration material, is deeply loved by major consumers, and more and more construction process projects of epoxy self-leveling floor paint are formulated by floor paint manufacturers.

    无论是哪个环氧地坪漆施工方案,基面的处理都是至关重要的,在施工前使用无尘研磨机、铲刀来清除地面,保持地面清洁,如果是破损的地面还需要先将其修补好再进行上述的工作。然后就是用底涂按配比充分混合搅拌,平整均匀涂铺满清洁后的地面,涂满封闭地表面,使底涂料渗透基层,达到一定要求的厚度。在环氧自流平地坪漆施工流程中,都会特别备注第一道和第二道的施工,需要等到8小时以后,如果是平刀均匀涂刮还需要等到16小时以后。最后就是面涂的施工,在这里需要先使得腻子层平整,将面涂材料按照配比充分混合搅拌,在用镘刀均匀镘涂一遍。

    No matter which floor paint construction scheme, the treatment of the base surface is very important. Before construction, dust-free grinder and spade are used to clean the ground and keep the ground clean. If the damaged ground is damaged, it needs to be repaired before doing the above work. Then, mix and mix the primer in proportion, spread the clean ground evenly and smoothly, and coat the closed surface, so that the primer penetrates into the base and reaches the required thickness. In the construction process of epoxy self-leveling floor paint, special attention will be paid to the construction of the first and second routes, which need to wait for 8 hours, and 16 hours if the flat knife is uniformly scratched. Finally, the construction of surface coating, where the putty layer needs to be made flat, the surface coating material in accordance with the proportion of fully mixed mixing and stirring, with a shovel knife uniform trowel coating once.

    想要制定完美的环氧自流平地坪漆施工流程,就必选先了解施工场地的情况,地面的好坏,客户的要求,还有施工地面的使用功能等等,所谓知己知彼方能百战百胜,而正确的制定施工方案也是如此。



    标签:   环氧地坪 地坪 环氧自流平 环氧地坪施工 环氧地坪漆 地坪施工
    无锡环氧地坪 技术支持:【易商科技】