Antistatic floor paint is a popular epoxy floor paint in recent years. This kind of epoxy floor paint is very popular in the market regardless of its performance or price. Because its rise time is not long, so many people do not know enough about this epoxy floor paint, anti-static floor paint process and price are people's concerns. Now let's look at the anti-static floor paint construction process? What is the quotation for the construction of anti-static floor paint?
I. Construction Technology of Antistatic Floor Paint
1. Ground treatment
According to the situation of the ground, proper polishing, repair, decontamination and dust removal should be carried out.
2. Antistatic Primer
The anti-static primer with strong penetration and adhesion is rolled together to enhance the adhesion of the surface.
3. Copper foil laying
Conductive copper foil is laid on the ground, and copper foil is laid every 2m in the horizontal and vertical direction.
4. Antistatic Mortar
The antistatic component is added to the quartz sand and evenly coated on the ground with a scraper.
5. Antistatic Putty
Use antistatic ingredients to add a proper amount of putty powder, the same with a scraper to evenly coat it once.
6. Antistatic topcoat
Next roll the floor with antistatic topcoat.
7. Time when the floor is put into use
After finishing the smear, you need to wait 24 hours before you can go to work. After 72 hours, you can press it heavily.
II. Quotation for Construction of Antistatic Floor Paint
1. Reference price of Wes antistatic floor paint: about 40 yuan
Using Wes antistatic floor paint, the ground is easy to clean, neat, bright color, and good adhesion. It is not easy to delaminate in the process of using, which is smooth, seamless, self-leveling, with the characteristics of resistance to heavy pressure, corrosion, high wear resistance, chemical resistance, solvent resistance and so on. Now it has been accepted and used by many domestic manufacturers.
2. Yilong Antistatic Floor Paint Reference Price: 38 yuan
Yilong anti-static floor paint can eliminate and prevent static electricity or electromagnetic waves, and effectively avoid the interference and destruction of static sparks and electromagnetic waves. Since its inception, products have attracted much attention from consumers.
3. Reference price of Hongwei anti-static floor paint: about 18 yuan
The anti-static effect of Hongwei anti-static floor paint is very good, and is not affected by time, temperature, humidity, etc. Its surface is smooth, smooth, not easy to dust, and has good adhesion, wear resistance, heavy pressure resistance and impact resistance.
Note: The above price comes from the network, for reference only!
3. How to Accept Antistatic Floor Paint
1. When acceptance, anti-static floors need no bubbles, flat-coated and mortar floors have no bubbles, and self-leveling floors are seamless as a whole. Only one bubble is allowed to appear within 10 square meters.
2. Anti-static floor is smooth and smooth. The glossiness standards are: high gloss (> 90%), gloss (> 70%) and half gloss (> 50-70%). Generally, flat coating is glossy, water-borne is half gloss or no gloss.
3. There are no impurities on the surface of the floor, but the floating dust impurities in the air are allowed to fall on the ground. The overall leveling is better, there are no knife marks, and the large area of the interface is flat.
4. There is no floating color on the surface of the anti-static floor, and the color is relatively single. The large area of the interface position is not allowed to have a large chromatic aberration.
标签:   环氧地坪 防静电地坪 地坪 环氧地坪漆 无锡环氧地坪