欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    老环氧地坪漆这么翻新才是正确的翻新方法

    2019-07-12 15:23:57 无锡盛发地坪科技有限公司 阅读

    环氧地坪漆翻新的意义在于旧的地坪漆容易释放有害气体,会对健康产生影响,在使用一段时间后的环氧地坪漆很多地面已经被损坏了。而重新涂抹环氧漆可以让地面看起来更加整洁,对地面也能起到相应的保护作用。从目前来看水性环氧地坪漆已经逐步成为了行业发展的趋势,而旧的环氧地坪漆可能含有的人体有害物质,需要用新的水性漆来更新。环氧地坪漆适用于多种场合,包括厂房、停车场、仓库等工业区域,会常常有人、车或是重型机械在上面行驶,久而久之,地面就容易破损或是出现一些缺陷。旧环氧地坪破损会影响它对地面的保护作用,容易起灰、起砂。灰尘进入机械内又会造成机械的损坏,所以,这时候就需要对旧地坪进行翻新处理。下面为大家介绍一下环氧地坪翻新的步骤。

    The significance of the renovation of the old epoxy floor paint is that the old floor paint is easy to release harmful gases, which will have an impact on health. Many floors of the old epoxy floor paint have been damaged after a period of time. Re-coated epoxy paint can make the ground look cleaner and protect the ground accordingly. At present, waterborne epoxy floor paint has gradually become the trend of industry development, and the old epoxy floor paint may contain harmful substances, which need to be updated with new waterborne paint. Epoxy floor paint is suitable for a variety of occasions, including factory buildings, parking lots, warehouses and other industrial areas, people, cars or heavy machinery will often drive on it, over time, the ground is easy to damage or some defects. Damage of the old floor will affect its protective effect on the ground, easy to ash and sand. Dust into the machinery will cause mechanical damage, so it is necessary to renovate the old floor at this time. Here are the steps of epoxy floor renovation.

    1、清除旧地坪。对于旧地坪要先使用专业的环氧消磨设备将其完全清除,这个第一步都是统一的,然后再根据不同的环氧地坪类型进行施工。

    1. Remove the old floor. For old floors, professional epoxy grinding equipment should be used to remove them completely. The first step is to unify them, and then to carry out construction according to different types of epoxy floors.

    2、清除油垢。如果地面有油污,要先将其清楚,再根据实际情况进行脱脂、脱油,确定表面干净后方可施工。

    2. Remove grease scale. If there is oil pollution on the ground, it should be clear first, then degrease and degrease according to the actual situation, and make sure that the surface is clean before construction.

    3、裂缝处理。材料和施工质量不好往往会造成地面裂缝产生,如果发现裂缝可以使用切割机把裂缝切成V形槽,然后灌入环氧砂浆使其平整即可。

    3. Crack treatment. Poor material and construction quality often lead to ground cracks. If cracks are found, a cutting machine can be used to cut the cracks into V-shaped grooves and then pour epoxy mortar into them to make them flat.

    4、坑洞处理。地面坑洞会使地面难以找平,建议使用打磨机打磨,将地面有空鼓的地方铲除,再用砂浆或是水泥进行坑洞处理。

    4. Treatment of pits. Ground holes will make it difficult to leveling the ground. It is suggested to use a grinder to grind the hollow areas of the ground, and then use mortar or cement to treat the holes. 



    标签:  地坪 环氧地坪 环氧地坪施工和 环氧地坪施工 环氧地坪翻新
    无锡环氧地坪 技术支持:【易商科技】