Self-leveling floor is what we call epoxy floor, also known as epoxy self-leveling floor, also known as epoxy floor paint floor. This method is widely used in garages, large office spaces and Gymnasiums in many places. This is because the epoxy floor is very wear-resistant, and very conducive to cleaning, long service life, so it is accepted by the majority of users and owners. The main material used in epoxy self-leveling is epoxy resin, which is then mixed with a certain proportion of curing agent dispersant, defoamer and filling material.
Basic Practice of Epoxy Self-leveling Ground
The method of epoxy self-leveling floor is mainly divided into three steps: the first step is primer, the second step is medium paint, and the third step is topcoat.
Construction of epoxy floor paint primer: First, the ground of the base is polished, all the floating slurry on the original concrete floor and the cement mortar with unqualified strength are polished, until the stone inside is exposed. Then make the high-power vacuum cleaner to absorb all the dust on the ground. Finally, the closed primer can be painted. The closed primer can be scraped by a wiper or brushed by a brush. The sealing primer must be tightly sealed and there must be no leakage, scratch and brush.
In fact, the construction of medium paint is very simple, as long as it is selected according to the requirements of the product, and then the use of wipers, at this time the use of this scraping floor paint wipers are with very small sawtooth of the kind of special wipers. It is after scraping, the light shines on, the floor paint is, one by one, it soon leveled itself. The coating thickness is required to be controlled. Finally, the construction of epoxy floor paint, topcoat is also the use of special surface materials, its construction method is exactly the same as the middle paint, but also after scraping it leveling itself.
Judgment of the Quality of Epoxy Floor Paint
The first point is to look at the surface of the floor paint after the completion of construction. After the construction of floor paint, its surface should be without any particles, very flat, and the photometric effect can reach the mirror. In addition, we can touch it with our hands. It's very smooth.
Second, we look at the surface fullness of the floor paint. A reference standard for judging the surface fullness of floor paint is the reflectivity of the floor paint, which requires that the reflectivity of the floor paint should be above 95% after completion of construction. Inspection is also very simple, that is, under the illumination of the light, we can see that the floor paint doors can be reflected, if large areas of non-reflective, this floor machine is not qualified. The last day to see the hardness of the floor paint, because the hardness of the floor paint, determines our future use life of the floor paint. The hardness of this good floor paint should be very high. We can use our fingernails to scratch on it. If we can't see any scratches after scratching, they are basically qualified. If we can go out and see obvious scratches, then we can judge them as unqualified.
About how to do the cement self-leveling on the floor, the household altar gives you a detailed analysis of the three-step method of self-leveling, and has judged some key factors of self-leveling. I hope my answer will be helpful to you all. If you have better opinions and suggestions, you can also share them for us to discuss and learn together. Thank you!
标签:   地坪 环氧地坪 环氧自流平 环氧地坪施工 环氧地坪漆