Solvent-free epoxy anti-static floor coating formulation: mix epoxy resin, pigments, fillers, active and inactive diluents, additives and other mixtures evenly, grind them to a certain fineness on three-roll mill, add conductive powder, evenly disperse, to prepare the main agent of epoxy anti-static floor coating; mix the main agent and the equivalent curing agent in painting. Uniform, self-leveling construction can be carried out by upsetting. Solvent-free anti-static self-leveling and self-leveling epoxy floor is not affected by time, temperature and humidity; the surface of the paint film is smooth and beautiful, reaching mirror effect; wear resistance, pressure resistance and impact resistance; chemical corrosion resistance, especially alkali resistance; production and construction process is simple and convenient, basically no VOC emissions, conducive to environmental protection.
Anti-static, epoxy self-leveling floor, paint formulation and construction technology
The excellent performance of epoxy anti-static floor coating and coating system meets the requirements of modern science and technology and production development for high cleanliness and anti-static floor. It has remarkable economic and social benefits, and its application status and prospects are very broad.
1. Construction preparation of epoxy anti-static floor
Tools: cement grinder, vacuum cleaner, mixer, measuring instrument, scraper, etc. Material: Antistatic Epoxy Primer (main agent and curing agent), solvent-free Antistatic Epoxy self-flow flat paint (main agent and curing agent), conductive copper foil, quartz sand, quartz powder, etc.
Construction preparation of epoxy anti-static floor
2. Epoxy anti-static floor base treatment:
During construction, it is necessary to remove the cement bumps and hollow drums of the concrete floor base, repair the cracked and defective holes, remove the oil and wet parts, and then grind them to obtain proper surface roughness, and sand blasting treatment is necessary. Construction site requirements: the relative humidity of air is less than 85%, and the temperature is not less than 5 C.
Treatment of Epoxy Antistatic Floor Base
3. Construction Technology of Epoxy Antistatic Floor
(1) Antistatic primer.
After stirring the anti-static primer evenly, scrape the floor with a scraper.
(2) Paste conductive copper foil.
After the primer is dried, the resistivity of the floor (requiring less than l04_. m) is measured, conductive copper foil is pasted at intervals of 3M * 3m, and the electrostatic dissipation leakage layer is established. A grounding device is connected to each 500m 2 to form a complete electrostatic leakage system.
Construction Technology of Epoxy Antistatic Floor
(3) Scraping epoxy anti-static mortar mid-coat paint.
The epoxy anti-static mortar is evenly mixed with anti-static primer and quartz sand according to a certain mixing ratio. The floor is scraped with a scraper for 1-3 times (depending on the thickness of the project), and the scraping thickness of the epoxy mortar is controlled at 1 mm per time.
(4) Scrape putty for the first time.
After the epoxy anti-static mortar mid-coat is dried, the resistivity of the floor is measured (requiring less than 104_. m). Epoxy anti-static primer and quartz powder are stirred in proportion to form epoxy anti-static putty. Scraper is used to scrape all over the putty, and then some defective holes are repaired.
(5) Scrape putty twice.
After the first time of putty drying, the main agent, curing agent and quartz powder of solvent-free epoxy anti-static floor paint are mixed evenly into epoxy topcoat putty, which is scraped once with a scraper.
The second time the putty is dried, the hole is filled, then the whole putty is polished and cleaned with fine sandpaper.
(7) Anti-static epoxy self-flow surface paint is applied by dysprosium.
Measure the resistivity of the floor (requiring less than 105_. m). Mix the solvent-free anti-static epoxy self-leveling agent and curing agent in proportion, mix and mix evenly. Self-leveling construction is carried out with a trowel, and defoaming drum is used to defoam the surface to ensure uniform color.
标签:   地坪 环氧地坪 防静电地坪 环氧地坪施工