Floor types in factory workshops have their own unique advantages and disadvantages. At present, epoxy flooring, gold steel sand and the latest new product concrete sealant and curing agent are the most widely used in the market. They are cheap in cost and quick in all aspects of construction. If the decorative effect of curing agent is general, they can be improved on the basis of curing. Why does the colouring damage the solid and durable factory floor with both the beauty of the epoxy floor and the solidified floor? Workshops are usually equipped with six kinds of decorative floors: floor tiles, terrazzo, marble, steel sand, epoxy floors and concrete sealing and curing agents. The following six kinds of floors have disadvantages:
地板砖：地面在重压下易起壳 地面开裂空股 地板砖破碎 地面易脏，清理比较麻烦.
Floor tiles: The floor is easy to crack under heavy pressure. The hollow floor tiles are easy to crush and dirty, so it is difficult to clean them up.
Concrete Sealing and Curing Agent Ground: The original color of cement, poor decorative effect.
Terrazzo floor: cracks, grooving, corrosiveness is relatively poor.
Gold Steel Sand Wear Resistant Ground: Powder, fade, crack, easy empty stock.
Marble floor: fragile, slippery, fading.
Epoxy Floor: Only indoor, no anti-ultraviolet function.
Concrete Sealing and Curing Agent Ground, Terrazzo Ground and Gold Steel Sand Ground: After the ground is used for a period of time, under the action of forklift truck or trailer, the ground will appear different degrees of sand turning and dusting. With the increase of service life, together with the effects of carbonization, water erosion and weathering, the ground surface will continue to be powdered. After cracks, grooves and pits begin to appear slowly; the floor heave is due to the weak bonding between the leveling floor and the floor; the cracks are also caused by the floor heave, and the cement label too bottom will produce this phenomenon. With the increase of service time, the damage area will become larger and larger, the service life will be shortened, and the normal use will be affected.
Epoxy Material Ground: If the ground is constructed with thin coating material and the construction quality is poor, the ground will peel in less than a year, mainly because the material is not firmly bonded to the ground.
If epoxy material is constructed on the first floor or basement without waterproofing layer, the ground will foam or delaminate. The reason is that the water vapor in the ground is covered by the epoxy above, which can not be excluded. It will foam, and delamination will occur slowly at the same time.
Basement Curing Agent Floor Effect Map
If the construction of epoxy material is not recommended in hardware workshop and steel factory, because the epoxy floor paint material achieves this kind of heavy-duty wear resistance and pressure resistance function, the ground will be scratched and dirty soon after completion, because the epoxy itself is a resin material, the wear resistance is not very strong, it will be scratched and faded. More suggestions to do concrete sealant curing agent floor!
标签:  地坪 环氧地坪 尼莫地平 耐磨地坪 停车场地坪 环氧地坪施工