欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    旧厂房里的环氧地坪如何进行快速翻新施工

    2019-07-08 12:06:51 无锡盛发地坪科技有限公司 阅读

    一般的环氧地坪正常使用年限大约是5~15年,然后在后续的使用中环氧地坪会逐渐出现一些问题,这时就是提醒您,应该对旧房里的环氧地坪进行维修了。我们的厂房为使其生产环境符合要求,就要对厂房升级改造,墙面、地面也就需要对旧房里的环氧地坪翻新处理。如电子厂房地面是否符合防静电要求,食品厂墙面是否符合抗菌、耐高温要求,烟厂、酒厂车间的墙面是否符合防霉要求。当然,各类旧厂房的翻新改造不需要过于时尚奢侈的操作,重点在于厂房的实用价值、满足使用性和装修质量的保障。

    The normal service life of the epoxy floor is about 5 to 15 years, and then there will be some problems gradually in the subsequent use of the floor. This is to remind you that the epoxy floor in the old house should be repaired. In order to make the production environment of our factory meet the requirements, we need to upgrade and renovate the factory buildings, and the walls and floors of the old buildings need to be renovated. If the floor of electronic factory meets the requirements of anti-static, the wall of food factory meets the requirements of anti-bacterial and high temperature resistance, and the wall of tobacco factory and wine factory meets the requirements of anti-mildew. Of course, the renovation and transformation of all kinds of old factories need not be too fashionable and luxurious operation, the focus is on the practical value of factories, to meet the usability and the quality of decoration.

    旧厂房翻新改造特别对于一些工业场所,因为有机械的运行和很多车辆的碾压,环氧地坪漆的亮度会降低,环氧地坪表面还可能出现一些划痕,严重的甚至会出现开裂、地坪漆剥落等现象。这些现象不仅严重影响了工业厂房的形象,更会导致生产效率低下。所以,需要将旧环氧地坪漆进行翻新,重新得到更好的使用。

    The renovation and renovation of old factory buildings is especially for some industrial sites. Because of the operation of machinery and the rolling of many vehicles, the brightness of epoxy floor paint will be reduced. Some scratches may appear on the surface of the floor, and even cracks and peeling of the floor paint will occur seriously. These phenomena not only seriously affect the image of industrial plant, but also lead to low production efficiency. Therefore, the old epoxy floor paint needs to be renovated to get better use.

    一,旧厂房环氧地坪翻新的主要步骤:

    First, the main steps of the renovation of the epoxy floor of the old factory buildings are as follows:

    1.清理旧厂房环氧地坪表面,铲除剥落掉的地方,打磨;空鼓或者凹陷的需要用砂浆填平。

    1. Clean up the surface of the epoxy floor of the old factory building, remove the peeling off place, Polish it; fill the empty drum or depression with mortar.

    2.使用腻子层或者是中涂一遍,使环氧地面更平整,最后再上一层面漆。

    2. Use putty layer or mid-coat once to make the epoxy floor smoother, and then finish with a layer of paint.

    二,在普通的环氧地坪或者旧厂房环氧地坪翻新后在涂上一层塑立得涂料。

    Second, after renovation of the ordinary epoxy floor or the old factory building epoxy floor, a plastic coat is applied.

    塑立得涂料可让旧厂房环氧地坪翻新后地坪使用年限增加,耐磨性耐划痕等性能增强。您可以了解一下塑立得产品!北京航特为您企业的地面量身定制专属地面防护翻新产品。施工简便、功能性出众,性能提升非常明显。塑立得地面防护翻新产品是您企业的不二的选择,对您的厂房负责,也是检验我们产品的时刻。

    The paint can increase the service life of the epoxy floor of the old factory building after renovation, and enhance the wear resistance, scratch resistance and other properties. You can learn about the Plastic Ride products! Beijing Airlines tailor-made special ground protection renovation products for your enterprise. The construction is simple, the function is outstanding, and the performance improvement is very obvious. Plastic ground protection renovation products are your company's best choice, responsible for your plant, but also the time to test our products. 


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪
    无锡环氧地坪 技术支持:【易商科技】