Epoxy floor paint is a kind of high strength, wear-resistant, beautiful floor, with seamless, solid texture, good resistance, anti-corrosion, dust-proof, easy maintenance, low maintenance costs and other advantages. The epoxy floor can be designed according to different application requirements, such as thin coating, 1-5mm thick self-leveling floor, anti-skid and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating, etc. The application of epoxy floor paint at low temperature will be affected to some extent, which is closely related to the material of epoxy floor paint. Now let's see what materials are available for epoxy flooring. Therefore, the curing of epoxy floor paint will be limited at low temperature. When the temperature is low in winter, the curing will be slow or non-drying. As for how to construct epoxy floor paint at low temperature, the epoxy floor Builder believes that as long as raw materials, catalysts and aid are selected and used in material production. Some adjustments can solve the problem that epoxy floor paint does not cure at low temperature in winter.
The problems of floor paint construction in winter include: stickiness, construction difficulty and so on. However, although the construction of winter epoxy floor paint is difficult and the quality is difficult to guarantee, if the project really needs to be constructed in winter or low temperature environment, the following methods can be referred to. 1、隔开低温时段
1. Isolation of Low Temperature Period
During the construction of epoxy floor paint, try to isolate the low temperature period, start construction after 10 a.m. and stop construction at 3 p.m. to reduce the impact of low temperature.
2. Increase room temperature
Increase the indoor temperature, raise the temperature to more than 5 degrees, which can also be constructed in winter. Many factories in North China have heating, which can be opened before and during construction.
3. Adding Solvents
Solvents with less than 5% volatilization rate can be added, such as acetone, ethyl acetate, butyl acetate, etc. This can solve the problem of high viscosity and lack of leveling of floor paint at low temperature.
4. Coating heating
Place the paint in a warm environment or heat it with steam or hot water. But be careful not to let steam or hot water into the paint, and the temperature of hot water should be controlled below 38 degrees.
5. Foggy weather is not suitable for construction
If the construction site is not a sealed space, encounter fog or frost and snow climate, can not be constructed. If the surface of the floor is covered with water vapor, it is not suitable for construction.
6. Pay attention to fireworks
In cold winter, workers are accustomed to smoking or lighting a fire for heating. At this time, they must pay attention to safety awareness and stop lighting a fire or smoking near the place where the paint is stacked. Fireworks, etc., should be far away from the paint accumulation site, in order to avoid causing unnecessary losses.
标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工