欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    一个标准的环氧防静电地坪该怎么施工呢?

    2019-07-01 17:34:26 无锡盛发地坪科技有限公司 阅读

    对于通讯设备制造厂、精密电子制造厂、计算机房等电子场所来说,静电荷会损害电子精密仪器,而静电效应产生的火花甚至会导致火灾或爆炸。这就需要地面具有防静电功能,环氧防静电地坪漆的出现则很好的解决了这一难题,不仅能快速消除静电荷,还兼具防尘、耐磨、抗冲击、抗压、表面光洁平整、美观等优点。那么一个合格的环氧防静电地坪漆该怎么施工呢?合格的环氧防静电地坪漆施工工艺:

    For communication equipment manufacturers, precision electronics manufacturers, computer rooms and other electronic places, electrostatic charge will damage electronic precision instruments, and the sparks generated by electrostatic effect can even lead to fire or explosion. This requires that the ground has anti-static function. The emergence of epoxy anti-static floor paint can solve this problem very well. It can not only eliminate static charge quickly, but also has the advantages of dust-proof, wear-resistant, impact-resistant, compressive, smooth surface and beautiful appearance. Then how should a qualified epoxy anti-static floor paint be constructed? The qualified construction technology of epoxy anti-static floor paint is as follows:

    1.素地处理

    1. Plain treatment

    根据基层地面的状况做好打磨、修补、除污、除尘,使地面表面干净、粗糙。

    According to the condition of the grass-roots ground, polishing, repairing, decontamination and dust removal are done to make the surface of the ground clean and rough. 基层地面打磨处理

    Grass-roots ground grinding treatment2.防静电底漆施工

    2. Antistatic Primer Construction

    将环氧防静电底漆按比例混合,搅拌均匀,用平刀或滚筒均匀地涂刷,增强表面附着力。

    The epoxy antistatic primer is proportionally mixed, stirred evenly, and evenly brushed with a flat knife or drum to enhance the surface adhesion.

    防静电底漆施工

    Construction of Anti-static Primer3.防静电中涂砂浆施工

    3. Construction of anti-static medium-coated mortar

    将环氧防静电中涂漆按比例混合,再加入适量石英砂,用搅拌机搅拌均匀,用批刀均匀地涂装于地面上,根据设计涂布多道,从而达到地面找平、增加涂层厚度的作用。

    The epoxy anti-static paint is mixed proportionally, and a proper amount of quartz sand is added. It is stirred evenly with a mixer and evenly coated on the ground with batch knives. According to the design, the coating is multichannel, so as to achieve the function of leveling the ground and increasing the thickness of the coating.

    防静电中涂砂浆层施工

    Construction of Anti-static Medium-coated Mortar Layer4.防静电中涂腻子施工

    4. Putty construction in anti-static

    待防静电中涂砂浆层完全固化后,将环氧中涂漆按比例混合,加入适量的滑石粉,用搅拌机搅拌均匀,用镘刀均匀地涂装一至两遍,填补砂浆中涂地面的针孔,使地面完全封闭。

    After the anti-static coating mortar layer is completely cured, the epoxy coating is proportionally mixed with appropriate amount of talcum powder, stirred evenly with a mixer, and coated evenly once or twice with a trowel to fill the pinholes in the surface of the mortar coating, so that the ground is completely closed.

    防静电中涂腻子层施工

    Construction of Putty Layer in Antistatic5.无尘打磨

    5. Dust-free grinding

    防静电腻子层完全干燥后,用无尘打磨机整体打磨,彻底消除刀痕并吸尘。

    After the anti-static putty layer is completely dried, it is entirely polished with a dust-free grinder to completely eliminate knife marks and dust.6.铜箔铺设

    6. Copper foil laying

    用导电铜箔以井字型铺设一层导电铜箔,并做接地处理,可有效排除累积的静电。铺设距为2.5m*2.5m,横竖交叉铺设。

    The cumulative static electricity can be effectively eliminated by laying a layer of conductive copper foil in a well-shaped shape and grounding treatment. Laying distance is 2.5m*2.5m, cross-laying.

    粘贴导电铜箔

    Paste Conductive Copper Foil7.导电炭黑施工

    7. CONDUCTIVE CARBON BLACK CONSTRUCTION

    将导电炭黑用滚筒或镘刀均匀地涂装于地面上。

    The conductive carbon black is evenly coated on the ground with a drum or trowel.

    导电炭黑施工

    CONDUCTIVE CARBON BLACK CONSTRUCTION8.防静电面漆施工

    8. Construction of Antistatic Topcoat

    待导电炭黑完全固化后,将防静电自流平面漆按比例混合,搅拌均匀,用镘刀均匀地涂装,确保表面颜色均一、平整、无气泡。

    When the conductive carbon black is completely cured, the anti-static self-flowing flat paint is mixed proportionally, stirred evenly, and coated evenly with a trowel to ensure uniform, flat and no bubbles on the surface.

    镘涂防静电自流平面漆

    Anti-static Self-Flow Flat Paint9.养护

    9. Maintenance

    环氧防静电环氧地坪漆施工完成后24小时后方可上人,72小时后方可重压,养护5-7天之后方可投入正常使用(25℃为准,低温时开放时间需适度延长)。

    Epoxy anti-static floor paint can be used 24 hours after completion of construction, 72 hours after heavy pressure, 5-7 days after maintenance can be put into normal use (25 C, low temperature opening time needs to be extended moderately).


    标签:   环氧地坪 环氧地坪漆 环氧地坪施工 地坪 无锡环氧地坪
    无锡环氧地坪 技术支持:【易商科技】