1. When brushing epoxy floor paint, we must check the flatness of the ground, and then brush it. Otherwise, it will affect the whole function of Huadu epoxy floor paint. On the high or low ground, make good symbols for polishing and repairing. We usually use a 2 m ruler to measure and record the gap difference. In the brush to see whether the ground is flat, and then brush, or will affect the overall role of epoxy floor paint, on the ground too high or too low to do a good job of symbols in order to understand the clear maintenance time before the construction, do a good job of cleaning floor paint, otherwise it will affect the quality of floor paint. Whether the waterproofing layer of floor paint should be constructed and what is the climate during construction? Because epoxy flooring is not suitable for construction in subcooled or wet environment. Generally speaking, 7 days is suitable for maintenance in summer, and 10 days is needed if the climate is colder and wetter. The purpose of water content detection is to prevent excessive water content from affecting the adhesion of coatings after construction.
2. How to prevent and cure the film defects such as sand and empty drum in the epoxy floor paint when brushing? This requires us to do a good job in the early operation of floor paint, usually before the construction of concrete strength check. Concerning the concrete with poor strength, special attention should be paid to dust collection before construction, and then the solvent-free primer coating should be diluted and used for underpainting to make the concrete more consolidated.
3. Whether the construction environment of Huadu epoxy floor paint is clean and closed must be checked. If there is no closure, dust will blow into the construction site, making the ground appear granular and uneven, then we must do a good job of pre-construction work, do not affect the quality of epoxy floor paint and painting effect.
标签:  环氧地坪 地坪 环氧底水平高 无锡环氧地坪 环氧地坪施工