The inspection of the construction quality of self-leveling epoxy floor paint is usually carried out after the film is completely dried. Its important steps are as follows: 1. Film inspection. It is important to see whether the appearance of the paint film is smooth, and no wrinkles, bubbles, hanging and other drawbacks are required. 2. Thickness. If the ground base is metal, to check its dry film thickness, it must be checked within three months of floor paint construction, and requires more than 85% of the test point thickness to reach or higher than the scale. 3. Adhesion. Testing the adhesion of floor paint according to the field environment. Important are the following several essentials: A. pull-apart method, using the tester, requires adhesion greater than 1.5 Mpa; B. tape method. This method is applied to the appearance of metal, and requires the grade of adhesion to be greater than 3; C. It is also a practical and metal appearance of the scratch tape method. Attachment grade is required to be less than 2.
Smell: A good self-leveling epoxy floor paint is usually light in taste and does not contain xylene. It is water-based or solvent-free by using diluent as active diluent AGE.
Look: To refine the color of the primer, the color of the primer in good floor paint is usually yellowish and transparent, while the color of the primer in poor epoxy floor paint is black.
Trial application of self-leveling epoxy floor paint: good products are not afraid of goods than three, not afraid of being tested.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪