What materials should be added to the construction of epoxy floor paint? The construction materials of epoxy floor paint are divided into main materials and auxiliary materials. The main material is epoxy floor paint, and the auxiliary materials are the materials added to the main materials during the construction of epoxy floor paint. Generally speaking, the epoxy floor paint does not need to add other materials. When used, the AB component can be proportionally mixed and stirred uniformly. Quartz sand, quartz powder or talcum powder are usually added in epoxy resin coating, and appropriate amount of quartz sand is added in epoxy resin coating, which is mainly used to leveling the ground, increasing the thickness of epoxy floor coating and the strength of epoxy floor. Quartz powder or talcum powder in epoxy resin coating is used to repair the holes, cracks, pinholes and some uneven defects of the ground. The epoxy floor with high surface requirement requires bright and smooth surface. Putty should be scraped and coated to modify the coating and ensure the desired smooth and smooth effect.环氧树脂面漆施工时一般需要添加稀释剂，因为环氧树脂面漆粘度大，比较粘稠，不用稀料的话，辊涂或者刮涂比较困难，最重点是没有足够的流平性，涂膜有薄有厚非常难看，稀释剂的作用就是增强流平性，使涂膜非常光滑平整。
In the construction of epoxy resin topcoat, diluent should be added, because the viscosity of epoxy resin topcoat is high and viscous, and it is difficult to roll or scrape without diluent. The most important thing is that there is not enough leveling, the film is thin and thick and very ugly. The role of diluent is to enhance leveling and make the film very smooth and smooth.
Equipment and tools required for epoxy floor paint construction:
Grinding Machine: It is equipped with diamond grinding knives for grinding concrete, terrazzo, hardened wear-resistant ground, marble and other base materials.便携式磨削机(角磨机)：用于小面积混凝土、水磨石、硬化耐磨地面、大理石等基材表面或边角部位打磨处理，亦可用于去除小面积的旧漆和油污层。
Portable Grinding Machine (Angle Grinding Machine): It is used to grind the surface or corner of base materials such as small area concrete, terrazzo, hardened wear-resistant ground, marble and so on. It can also be used to remove small area of old paint and paint stain layer.铣刨机：用于铣刨去除旧漆层、油污层等。抛丸设备：用于大面积混凝土、水磨石、硬化耐磨地面、大理石等基材表面抛丸处理。吸尘器：去除地面灰尘。
Milling Machine: Used for milling to remove old paint layer, oil stain layer, etc. Shot blasting equipment: for large area of concrete, terrazzo, hardened wear-resistant ground, marble and other substrate surface shot blasting treatment. Vacuum cleaner: Remove ground dust.锯齿镘刀、钉鞋、钉子辊筒：锯齿镘刀用于镘涂自流平环氧地坪漆涂料，然后用钉子辊筒辊压以释出膜内空气，对于局部涂装缺陷可在涂膜表干前穿钉鞋前往修复。
Sawtooth trowel, nail shoe, nail roller: Sawtooth trowel is used for self-leveling floor paint coating, and then rolled by nail roller to release air inside the film. For local coating defects, nail shoes can be worn to repair before the coating surface is dry.平刀：用于刮涂底漆、砂浆、腻子等稠厚环氧地坪涂料，适合于紧贴地面刮涂。
Flat knife: It is used for scraping thick floor coatings such as primer, mortar, putty, etc. It is suitable for scraping close to the floor.辊筒与漆刷：不掉毛的辊筒和刷子方能获得良好的外观，通常短毛辊筒具有更好的操作性。
Rollers and Brushes: Only the non-hair-shedding roller and brush can obtain a good appearance. Usually the short hair roller has better operability.
标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪