In the standard construction process of epoxy flooring, mortar and putty layers are usually coated. Mortar and putty layers form the middle coating of epoxy flooring coating. They can not only flatten the base surface, but also further stabilize the base surface and increase the thickness of the coating, thus improving the impact resistance, pressure resistance and wear resistance of the coating film, and effectively prolong the epoxy flooring. Service life. Since both mortar and putty layers belong to intermediate coatings, what is the difference between them?环氧地坪中涂砂浆层和腻子层的相同点：
Similarities between mortar and putty coatings on epoxy floors:
Epoxy floor mortar and putty are prepared by adding a certain proportion of filler into the epoxy coating of Guanglei, and scraping construction is carried out with batch knives. 环氧环氧地坪中涂砂浆层和腻子层的不同点：
The difference between mortar layer and putty layer in epoxy floor:
Epoxy putty layer is to add appropriate amount of fine quartz powder to the epoxy coating. It can be used to scrape the putty layer with even stirring. It can effectively repair the fine holes, cracks, pinholes and some uneven defects of the ground. For epoxy floor with high surface requirements, it is necessary to scrape the putty in order to modify the coating and ensure that the predetermined surface is bright and smooth. Smooth and smooth effect.环氧地坪砂浆层是往环氧中涂中加入80-120目的石英砂，做完后表面比较粗糙，因此在环氧砂浆层做完后需要再施工环氧腻子层进行找平。
Epoxy floor mortar layer is to add 80-120 mesh quartz sand to the epoxy coating. After finishing, the surface is rough. Therefore, epoxy putty layer needs to be leveled after finishing the epoxy floor mortar layer.批刮环氧中涂腻子层
If the epoxy floor paint construction base surface is relatively flat, no holes, and no load, you can omit the mortar coating, directly apply the putty layer in the epoxy, and then paint the epoxy floor paint.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪