欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪施工过程中地坪研磨机使用技巧

    2019-06-19 09:40:48 无锡盛发地坪科技有限公司 阅读

    环氧地坪漆施工过程中,环氧地坪研磨机进行地面打磨是非常重要的一项工作,环氧地坪漆厂家给大家总结了一下环氧地坪漆施工过程中研磨机使用注意事项,一起来了解一下。根据环氧地坪漆施工面积的不同选择适合的环氧地坪打磨机,例如项目面积比较大,就应该选择大型地坪研磨机,这样不仅能提高工作效率,还能保证地面打磨效果。对于项目面积较小的楼梯间、样板间以及边角的地方,则建议选择小型研磨机或者角磨机。

    In the construction process of epoxy floor paint, ground grinding by ground grinder is a very important work. Guanglei epoxy floor paint manufacturer summarized the points needing attention in the use of ground grinder in the construction process of epoxy floor paint, together to understand. According to the different construction area of epoxy floor paint, choose suitable floor grinder, such as large project area, we should choose large floor grinder, which can not only improve work efficiency, but also ensure the ground grinding effect. For the small stairwell, sample room and corner of the project area, it is recommended to choose a small grinder or corner grinder.1、检查地坪研磨机运行是否正常

    1. Check whether the floor grinder is working properly.

    我们在使用地坪研磨机打磨地面的过程中,可能会遇到突然停止运行的情况,这就需要环氧地坪漆施工人员先检查电源和机器电线接口是否正常,如果通电是正常的,则需要检查电机是否完好,有没有烧坏等现象。如果这些都是没有问题的,地坪研磨机还是无法运行,那就需要环氧地坪漆施工人员检查是不是因为电线太长或者电源线线芯太细导致电压不足无法带动机器运转。

    In the process of grinding the ground with a floor grinder, we may encounter a sudden stop of operation, which requires epoxy floor paint builders to check whether the power supply and machine wire interface are normal, if the power is normal, then we need to check whether the motor is in good condition, whether there is burnout and other phenomena. If these are all no problems, the floor grinder still can not operate, it needs the epoxy floor paint builder to check whether it is because the wire is too long or the core of the power cord is too thin, resulting in insufficient voltage to drive the machine to run.2、将磨盘调节平整

    2. Leveling the Abrasive Disc

    地坪研磨机的磨盘高低不平会导致机器在运行过程中剧烈抖动,地面打磨效果差,容易出现不平整的状况,这就需要环氧地坪漆施工人员在地坪研磨机使用前将磨盘调平,使磨盘处于同一个平面。

    The unevenness of the grinding disc of the floor grinder will cause severe jitter during the operation of the machine, poor ground grinding effect and prone to uneven conditions, which requires epoxy floor paint builders to leveling the grinding disc before the use of the floor grinder, so that the grinding disc is in the same plane.3、把握好打磨时间

    3. Grasp the grinding time

    地面在粗磨的时候,应该先进行试磨,这是因为打磨时间太短,会导致地面打磨效果差。如果打磨时间太久,会导致地面强度降低。因此,我们在用地坪研磨机粗磨地面时要把握好打磨时间。

    When the ground is roughly ground, it should be tested first, because the grinding time is too short, which will lead to poor ground grinding effect. If the grinding time is too long, the ground strength will be reduced. Therefore, we should grasp the grinding time when grinding the ground roughly with the floor grinder. 


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪
    无锡环氧地坪 技术支持:【易商科技】