欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    地坪漆厂家介绍环氧地坪施工的涂层组成

    2019-06-06 12:28:33 无锡盛发地坪科技有限公司 阅读

    环氧地坪漆是双组份环氧地坪材料,主要分为为环氧树脂和固化剂,采用一次性涂覆工艺,不管有多大的面积,都不存在连接缝。由于环氧树脂地坪是无缝铺设,所以也具有很好的防水、防尘的性能,同时环氧树脂地坪具有耐强酸碱性、腐蚀性、耐磨、耐压等众多性质。根据环氧地坪漆涂装的目的和不同的要求,通常产品的涂装体系由多道涂层组成,其中包括底漆层、砂浆层、腻子层、面漆层、罩光层等。

    Epoxy floor paint is a two-component floor material, mainly divided into epoxy resin and curing agent, using one-time coating process, no matter how large the area, there is no joint. Because the epoxy floor is seamless, it also has good waterproof and dust-proof performance. At the same time, the epoxy floor has many properties such as strong acid-alkali resistance, corrosion resistance, wear resistance, pressure resistance and so on. According to the purpose and different requirements of epoxy floor paint, the coating system of products usually consists of multiple coatings, including primer layer, mortar layer, putty layer, topcoat layer, gloss layer, etc.底漆层是与被涂基础地面直接接触的最下层的漆层。底漆层的作用是强化涂层与基体之间的附着力,提高环氧地坪漆涂层的防护性能。砂浆层主要是用来增加环氧地坪漆的厚度和强度,对于基础地面平整度较差的可以起到找平、修补作用,还能提升环氧地坪的耐载重、耐磨性和抗冲击性。

    The primer is the lowest layer of paint that is in direct contact with the underlying ground. The function of the primer is to strengthen the adhesion between the coating and the substrate and to improve the protective performance of the epoxy floor paint coating. Mortar layer is mainly used to increase the thickness and strength of epoxy floor paint, which can leveling and repairing the poor smoothness of the foundation floor, and also improve the load resistance, wear resistance and impact resistance of epoxy floor.腻子层可以有效的修复地面的细孔、裂纹、针眼以及一些凹凸不平的缺陷,对于表面要求高的装饰性环氧地坪,要求表面光亮、平整,则需要刮涂腻子,以便修饰涂层,保证达到预定的光滑、平整的效果。

    Putty layer can effectively repair the surface of fine holes, cracks, pinholes and some uneven defects. For decorative floors with high surface requirements, it is necessary to scrape and coat putty in order to modify the coating and ensure the desired smooth and smooth effect.面漆层在底漆(或腻子)层之上。其主要作用是提高装饰性,同时,也有一定的防腐性和耐磨性。面漆层决定了环氧地坪的基本色彩,使涂层丰满美观。罩光层是涂层的最外层(可以根据实际需求选择做),主要目的是增加产品的光泽,通常用于光泽要求高的高级涂层,并且能够提升环氧地坪的耐磨性。

    The topcoat is over the primer (or putty) layer. Its main function is to improve decoration, at the same time, it also has a certain degree of anti-corrosion and wear resistance. Topcoat determines the basic color of epoxy floor, making the coating plump and beautiful. Covering layer is the outermost layer of the coating (which can be chosen according to the actual needs). The main purpose is to increase the gloss of the product. It is usually used for high-grade coatings with high gloss requirements and to improve the wear resistance of epoxy floors. 


    标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪
    无锡环氧地坪 技术支持:【易商科技】