There are three main reasons for the lack of gloss of epoxy floor paint after construction: weather, construction and material. 1. Weather reasons. If the air humidity in the construction site is too high, the surface of epoxy floor paint will become white and glossy after construction. 2. Construction reasons. First, the problem of base surface treatment, if the base surface polishing treatment is not in place, there are oil stains, pits and depressions on the ground, which will lead to pits and depressions after the construction of floor paint (thin coating of floor paint), light refraction leads to insufficient gloss on the surface of the film. The second is the problem of polishing the epoxy mortar floor mortar layer. In the same way, if there is no polishing certificate after the construction of the mortar layer, the fine concave and convex of the quartz sand filler will cause the surface of the coating not smooth enough. 3. Material problems. If excessive diluent is added to the floor paint material, the gloss of the epoxy floor paint will be insufficient after construction.
How to prevent the glossiness of floor paint after construction?
1. The optimum construction temperature of epoxy floor paint is 5-30 degrees, and the air humidity at the construction site can not exceed 85%.2、要严格按照环氧地坪漆施工工艺进行施工，做好基础地面的处理工作，做好细节工作是做出优质地坪漆工程的前提。
2. We should strictly follow the construction technology of epoxy floor paint, do a good job in the treatment of the foundation floor, and do a good job in details is the premise of making a high-quality floor paint project.3、地坪漆材料中加入的稀释剂不能过量，选择的稀释剂沸点不能太低。
3. The diluent should not be excessive and the boiling point of the selected diluent should not be too low.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪