欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    环氧树脂地坪出现刷痕的原因及处理技巧

    2019-06-03 09:05:17 无锡盛发地坪科技有限公司 阅读

    环氧树脂地坪有刷痕不仅会影响我们的正常使用,还会大大降低美观度,对于我们日常使用无锡环氧树脂地坪也是很麻烦的一个问题。以下就是环氧树脂地坪有刷痕比较常见的几种原因,了解环氧树脂地坪有刷痕的常见原因,就可以提前做好防护措施,避免出现这种问题。提前做好防护措施,可以防患于未然,对于我们正常使用环氧树脂环氧地坪是很有必要的。造成环氧树脂环氧地坪表面出现刷痕的原因主要有四个:施工原因、工具原因、涂料原因和天气原因。

    The brush marks on the epoxy floor will not only affect our normal use, but also greatly reduce the aesthetics. It is also a very troublesome problem for our daily use of Wuxi epoxy floor. The following are several common reasons for brush marks on epoxy floors. Understanding the common reasons for brush marks on epoxy floors, we can take preventive measures in advance to avoid this problem. It is necessary for us to use epoxy flooring regularly. There are four main reasons for the brush marks on the surface of epoxy resin floor: construction reason, tool reason, paint reason and weather reason.

    环氧树脂地坪

    1、施工原因:环氧地坪漆施工人员的施工方法不正确,涂料在搅拌后施工时间过长,滚刷不均匀,涂层薄厚控制不到位。或者搅拌后没有熟化就开始涂刷,混合不够彻底,导致出现刷痕。

    1. Construction reason: The construction method of epoxy floor paint builders is incorrect, the construction time of the paint after mixing is too long, the rolling brush is not uniform, and the thickness of the coating is not in place. Or start painting without ripening after mixing, the mixing is not thorough enough, resulting in brush marks.

    2、工具原因:施工人员所使用的的滚筒质量不达标,滚筒表面掉毛导致出现刷痕。

    2. Tool reasons: the quality of the drum used by the constructors is not up to the standard, and the surface of the drum drops, resulting in brush marks.

    3、涂料原因:环氧地坪漆质量不合格,流平性差,粘度过高导致施工出来的环氧地坪漆出现刷痕。

    3. Paint reason: The quality of epoxy floor paint is not up to standard, the leveling property is poor, and the viscosity is too high, which results in the brush marks of the epoxy floor paint.

    4、天气原因:天气温度过高,固化反应速度较快,流平性变差。或者空气湿度较大,导致色浆分散不均匀所致。

    4. Weather reasons: high temperature, fast curing reaction and poor leveling. Or the air humidity is larger, resulting in uneven dispersion of color paste.解决环氧树脂地坪出现刷痕的方法:

    The method of solving the brush mark on the epoxy floor is as follows:

    1、施工人员应具有相应的施工经验,严格按照施工工艺进行施工,涂料搅拌之后要抓紧施工,避免施工时间过长。

    1. The construction personnel should have the corresponding construction experience, strictly follow the construction process, after mixing the paint, they should pay close attention to the construction, so as to avoid the construction time being too long.

    2、选择质量合格的油漆专用滚筒,使用之前用胶带处理一下滚筒表面。

    2. Select the qualified special drum for painting, and use tape to treat the surface of the drum before using it.

    3、选择质量有保证的环氧地坪漆涂料,可加入少量稀释剂,降低涂料的粘度。进行涂料过滤,防止杂质出现。随时添加少量流平剂、分散剂等提高涂料的流平性和色浆分散。

    3. Choose epoxy floor paint with guaranteed quality and add a small amount of diluent to reduce the viscosity of the paint. Filtration of paint to prevent impurities. Adding a small amount of leveling agent and dispersant at any time can improve the leveling and dispersion of the paint.

    4、避免阴雨天气面漆施工,面漆施工时关闭门窗,防止流通造成的表面污染。

    4. Avoid the construction of topcoat in rainy weather. Close doors and windows during the construction of topcoat to prevent surface pollution caused by circulation. 



    标签:   地坪 环氧地坪 环氧地坪施工 环氧地坪漆 无锡环氧地坪 环氧树脂地坪
    无锡环氧地坪 技术支持:【易商科技】