For the epoxy floor paint builders, they need to master all kinds of epoxy floor paint construction technology, so as to make the corresponding epoxy floor according to customer requirements. In the construction of self-leveling epoxy floor paint, metal trowel is needed. The construction effect of self-leveling epoxy floor paint is directly determined by the correctness and skillfulness of the construction personnel. The following Guanglei Floor Paint Factory will introduce to you the construction method of epoxy self-flow floor paint. Construction method of epoxy self-flowing flat paint upsetting: 1、将光磊环氧自流平面漆材料按比例混合搅拌均匀，并且过滤掉颗粒等杂质。然后，将搅拌均匀的环氧地坪漆材料按一定量倒在基础地面上的镘涂开始点。一般情况是，基础地面的边角上，即镘涂开始点。
1. Mixing and stirring the material of Guanglei epoxy self-flowing flat paint in proportion, and filtering out impurities such as particles. Then, the uniformly stirred floor paint material will be poured on the foundation floor at a certain amount of upsetting start point. Generally speaking, the starting point of upsetting is at the corner of the foundation ground.
2. Scrape the inverted Guanglei floor paint material with a trowel, pay attention to the angle between the trowel and the ground, and scrape the floor paint material along the ground.
3. In order to avoid the appearance of trowel marks after solidification of the self-leveling floor project (refer to "How to solve the trowel marks on the surface of epoxy self-leveling floor paint"), the skills and strength of each constructor in the whole self-leveling floor project need to be roughly the same, which will test whether each constructor is skilled in using trowel. After completion, the edges of the coated surface also need to be smoothed with a trowel knife.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工