欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪漆面漆层有气泡是什么原因?

    2019-04-24 13:15:36 无锡盛发地坪科技有限公司 阅读

    正常来说,环氧地坪漆面层是光滑平整、整体无缝的,非常的美观。但是,有一些消费者在施工环氧地坪漆的时候会遇到面漆层存在气泡的问题,如果是个别气泡还好,若是大面积出现气泡问题就会影响整体环氧地坪工程的美观。那么对于环氧地坪漆面漆层气泡问题怎么解决呢?环氧地坪漆面漆层气泡产生原因:

    Normally, the epoxy floor coating is smooth, smooth, seamless and very beautiful. However, some consumers in the construction of epoxy floor paint will encounter the problem of air bubbles in the topcoat. If it is individual air bubbles, it will affect the overall aesthetics of the epoxy floor project if there is air bubbles in a large area. So how to solve the problem of bubbles in epoxy floor paint? The causes of bubbles in epoxy floor paint are as follows: 

    1、基层地面没有做好防潮措施,基面含水率大于12%。

    1. There is no good moistureproof measures on the base surface, and the moisture content of the base surface is more than 12%.

    2、施工人员技术不够熟练,施工时环氧地坪漆操作流程不规范;

    2. The technicians are not skilled enough and the operation process of epoxy floor paint is not standardized.

    3、进行环氧地坪漆施工时环境温度不适宜。

    3. The ambient temperature is not suitable for the construction of epoxy floor paint.


    环氧环氧地坪气泡问题预防方法

    Preventive methods for bubble problems in epoxy floors:

    1、必须做好基础素地封闭再做面漆层,尤其是水磨石、低强度水泥砂浆等气孔比较多的地面;

    1. We must do a good job of sealing the basic ground and then making the topcoat, especially the ground with more air holes such as terrazzo and low strength cement mortar.

    2、在施工面漆层时,施工速度不宜太快,回刀时一定要到位;

    2. In the construction of topcoat, the construction speed should not be too fast, and must be in place when the knife is returned.

    3、对于厚涂型环氧地坪(如环氧自流平地坪),可以在刮完面漆后,用消泡滚筒滚一遍,帮助气泡消平。

    3. For thick-coated floors (e.g. epoxy self-leveling floors), after scraping the finish paint, the defoaming drum can be used once to help defoam the floors.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】