In the construction of epoxy floor paint, the most commonly used construction tool is the roller. If the newly purchased roller has hair loss phenomenon, it will lead to rough surface of epoxy floor paint and affect the overall aesthetic effect of epoxy floor paint. Therefore, the newly purchased drum needs simple dehairing treatment before use. The drums used in the construction of epoxy floor paint are generally wool products, including wool, nylon, wool, synthetic fibers and so on. It is unavoidable that the new drum will lose its wool. If the loose drum wool is not removed before construction, it will be mixed in the floor paint, which may affect the coating effect of the floor paint materials.
The Plush on a drum is tens of millions, and there are many loose ones. How can we clean it completely? Flush it with water? Blow it with a wind drum? Grab it by hand? These methods are useful, but they are too slow and may leak the net. In fact, the best way to dehairing new drums for floor paint construction is to use adhesive tape. That's right. It's the transparent glue we usually use to seal boxes. It's two yuan a roll. Fixed the transparent glue, then glued the drum, pulled it back and forth, and all the loose Plush on the drum was glued to the transparent glue.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工