欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪漆表面失光不光亮怎么办?

    2019-04-03 16:05:49 无锡盛发地坪科技有限公司 阅读

    我们都知道环氧地坪漆在不做哑光处理的情况下,表面光亮美观、甚至能达到镜面的效果,但是有些客户却发现他们做的环氧地坪漆表面不光亮,甚至失光,严重影响了环氧地坪漆工程的美观性,这是什么原因造成的呢?下面光磊环氧地坪漆厂家就给大家详细分析解答。导致环氧地坪漆表面不光亮的原因主要有以下几点:

    We all know that epoxy floor paint is bright and beautiful without matte treatment, even can achieve mirror effect, but some customers find that their epoxy floor paint surface is not bright, or even glossy, seriously affecting the aesthetics of the epoxy floor paint project. What is the reason? Here, Guanglei floor paint manufacturers will give you a detailed analysis and answer. The main reasons leading to the glossy surface of epoxy floor paint are as follows: 1、基础地面没经过处理,含有酸、碱、油污、蜡质和水分等,导致环氧地坪工程表面失去了光亮。

    1. Untreated foundation ground contains acid, alkali, oil, wax and water, which results in the loss of brightness on the surface of the floor project.

    2、施工现场环境的相对湿度过高,导致漆层干燥时,吸收了过多的水分,因此地坪工程表面泛白,失去了光亮。

    2. The relative humidity of the construction site environment is too high, which causes the paint layer to absorb too much moisture when it is dry. Therefore, the surface of the floor project is white and loses its brightness.

    3、施工现场的环境温度过低或者雾气的影响也会令地坪工程表面失去光亮。

    3. The low ambient temperature or the influence of fog on the construction site will also make the surface of the floor project lose its brightness.

    4、下层漆膜未完全干燥就强制进行了下一道的漆层施工,导致下层漆层回软,因此地坪工程表面失去了光亮。

    4. Underlayer paint film is not completely dried, the next layer of paint is forced to be constructed, resulting in the softening of the underlayer paint, so the surface of the floor project loses its brightness.

    5、配漆时加入了过量的稀释剂,导致地坪漆过于粘稠,因此地坪工程表面失去了光亮。

    5. Excessive diluent was added to the paint, which resulted in the floor paint being too thick, so the surface of the floor project lost its brightness.


    预防环氧地坪漆表面不光亮的方法

    Methods to prevent the surface of epoxy floor paint from being glossy:

    1、基础地面必须经过补缝、补洞、打磨、清洁后才能进行地坪漆施工。

    1. The foundation ground must be repaired, hole repaired, polished and cleaned before floor paint can be constructed.

    2、必须等待下层漆层完全干燥后才能进行下一道工序。

    2. It is necessary to wait until the lower layer is completely dried before the next process can be carried out.

    3、施工前做好现场环境的勘察,环境温度过高过低、太过潮湿或太多雾气都不宜进行施工,必须控制好环境因素后方能进行施工。

    3. Do a good job of site environmental survey before construction, the environmental temperature is too high or too low, too humid or too much fog are not suitable for construction, we must control the environmental factors before we can carry out construction.

    4、光磊环氧地坪漆厂家反复强调,好的地坪漆材料是环氧地坪工程质量的必要前提,因此,我们选材要选用知名的地坪漆品牌产品,并且在配漆时按标准加稀释剂。

    4. Guanglei epoxy floor paint manufacturer has repeatedly stressed that good floor paint material is the necessary prerequisite for the quality of epoxy floor engineering. Therefore, we should select well-known brand products of floor paint, and add diluent according to the standard when preparing paint.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】