When vehicles, forklifts and forklifts are running, try to avoid braking. Where oil often leaks, the price of epoxy floor paint. Sawdust can be used to clean, so as to avoid oil denaturation, adsorbing ash layer, become a stubborn stain. When the oil immersion area is large, we can use a wide cloth mop to drive the sawdust to absorb the oil from the floor.
(1) When the epoxy floor paint is used in cross construction, the construction environment should have enough isolation area to prevent the ash and sand from penetrating the impervious paint film.
(2) In areas susceptible to pollution, more prominent doors and corridors should be cleaned 1-2 times a day with wide cloth mops.
(3) If there are coarse and hard sand grains and mud on the ground, it should be cleaned up in time, and epoxy floor paint should be used to avoid grinding the ground by sand grains and reduce ground wear.
(4) Employees should change their soft soles before entering the clean area; plastic blankets should be installed at the junction where sand and mud are easily brought into the area, and epoxy floor paint agents should be installed at the entrance and exit, so as to facilitate the removal of sole debris when employees enter and exit.
(5) When unloading forklift trucks, attention should be paid to the placing of the cargo so as to avoid scratching the epoxy floor by the side nephew or towing of the cargo.
(6) Machine repair tools should avoid falling to the ground as far as possible. If a large area of paint film is damaged, the epoxy floor paint shop will report for repair in time so that the repairing operation can be carried out before the oil seeps into the foundation.
(7) When washing the floor with water in the workshop, avoid oil-water mixture depositing in deep damaged areas. If the epoxy floor is used well, the service life will be prolonged, generally about 10 years.
标签:   地坪 环氧地坪漆 环氧地坪 环氧地坪施工