欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪漆施工需要经历的步骤

    2019-03-07 15:09:31 无锡盛发地坪科技有限公司 阅读

    专注的环氧地坪施工品行首要源自优良的环氧地坪涂料,施工员工的经验以及实时的售后服务,涂装向来都致力于打造企业客户较信得过的环氧地坪品行,咱们具备十年以上的施工经验为客户量身定制较适当的环氧地坪计划,十足让客户无后顾之忧!环氧地坪漆的具体施工步骤环氧地坪漆的满堂施工方法环氧地坪漆的方法首要分为底涂、中途、批补、面涂和养护。

    Focused on the construction of epoxy floor paint, the experience of construction staff and real-time after-sales service, painting has always been committed to building enterprise customers more trustworthy floor conduct, we have more than 10 years of construction experience for customers tailor-made more appropriate floor plan, fully allowing customers to worry about the specific construction steps of epoxy floor paint ring! ____________ Oxygen floor paint construction method of the full hall Epoxy floor paint methods are mainly divided into primer, midway, batch, topcoat and maintenance. 1、底涂.将混凝土基材办理完结并处理清洁后就可实行底涂(辊涂或刷涂),辊涂或刷涂应均匀,厚薄一概.该底涂具备必需的透水汽功用,能加强基材强度并增补涂层对基材的附着力.

    1. Bottom coating. After finishing and cleaning the concrete base material, the bottom coating (roller coating or brushing coating) can be applied. The roller coating or brushing coating should be uniform and uniform in thickness. The bottom coating has the necessary water vapor permeability function, which can strengthen the strength of the base material and increase the adhesion of the coating to the base material.

    2、中涂.在已配好的环氧涂料(中涂)中加入石英砂和石英粉配成水性环氧泥浆,用镘刀将其均匀涂布,用于增补厚度及涂层抗压强度.

    2. Intermediate coating. Water-borne epoxy mud is prepared by adding quartz sand and quartz powder into the prepared epoxy coating (intermediate coating). The mud is evenly coated with a trowel knife to supplement the thickness and compressive strength of the coating.

    3、批补.中涂后用砂纸打磨地坪,并用环氧涂料(中涂)以及石英粉配成的腻子依现实需求施工数道,条件抵达平坦无孔洞,无批刀印和砂磨印为准.

    3. Batch repairing. Sand paper is used to polish the floor after middle coating, and putty made of epoxy paint (middle coating) and quartz powder is constructed several times according to the actual needs. The condition is flat and without holes, and no batch knife prints and sanding prints shall prevail.

    4、面涂.用辊涂将环氧地坪涂料面涂辊涂两道,竣工后条件满堂地面腻滑温柔、清洁、颜色均一、无空鼓.

    4. Surface coating. Two rolls of epoxy floor coating are applied. After completion, the floor is smooth, gentle, clean, uniform in color and no empty drum.

    5、养护.面层实干需求24H,在这时期应实行封闭,比免感化口头清洁腻滑的成效.3D后方可上人,竣工调养7平明方可正式倾注利用(25℃为准,低温时需节制延接)

    5. Maintenance. Surface dry demand 24H, in this period should be closed, than the effect of non-sensitization oral cleanliness and smoothness. 3-D can be used only after the completion of conditioning 7 Ping Ming can be officially poured into use (25 C is the standard, low temperature need to be controlled and extended)



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】