欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪漆的设计施工流程操作方式

    2019-03-07 15:07:35 无锡盛发地坪科技有限公司 阅读

    环氧地坪漆外表更润滑闪亮 ?环氧地坪漆涂料到达完满的效果,爲了使我公司建议:不平整空中我公司参与水泥找平找平层施工工艺。找到当事人,平常在我公司水泥混凝初是专业机器的外表润滑的空中。对环氧涂层的根底上的效果的外表更润滑闪亮,寿命也会进步。

    Epoxy floor paint is more lubricating and shiny? Epoxy floor paint achieves perfect effect. In order to make our company recommend: In the uneven air, our company participates in the construction process of cement leveling layer. Find the parties, usually in our company cement coagulation is a professional machine in the outer lubrication of the air. The appearance of the effect on the base of the epoxy coating is more lubricant and shiny, and the life of the epoxy coating is also improved.

    2,在枯燥的水泥层后(约28天),与全体的磨床在磨削加工的空中,使其外表润滑,水泥毛细孔完全翻开。

    2. After the dry cement layer (about 28 days), in the grinding air with the whole grinder, make its appearance lubricated, and the cement capillary holes completely open.

    3,对油井水泥地板(食用油,机油),具有特殊的洗濯剂冲洗外表,重复擦洗,直到无净化。

    3. For oil well cement flooring (cooking oil, engine oil), it has a special detergent to wash the appearance, and repeat scrubbing until there is no purification.

    4,由于地板太碱(pH>8),采用特殊资料和第一,然后用清水冲洗;

    4. Because the floor is too alkali (pH > 8), special data and the first one are used, and then rinsed with clean water. 5,在湿润的空中上,经过水。干,日光灯,风扇吹枯燥和酷热枯燥,使其满足施工要求。

    5. In wet air, through water. Dry, fluorescent lamp, fan blow dry and hot dry, make it meet the construction requirements.

    6,爲旧漆空中(如碳化硅外表和旧漆空中),公用机床首先去除旧漆,然后处置好水泥,砂空中在同一工夫在空中上打毛。经过这样处置后的空中,老水泥和碳化硅外表除去,构成粗糙的外表,从而进步涂层的粘附到新,进步涂层的运用寿命。

    6. For the old paint in the air (such as the silicon carbide appearance and the old paint in the air), the common machine tool first removes the old paint, then disposes of the cement, and the sand in the air in the same time to wool. After such disposal in the air, the old cement and silicon carbide surface are removed, forming a rough surface, thus improving the adhesion of the coating to the new, and improving the service life of the coating.

    环氧地坪漆主晓得第一个工件的尺寸和数量的涂层。

    The epoxy floor paint owner knows the size and number of coatings for the first workpiece.

    (2)依据外表防锈油,水平,计算每个工件的外表处置所需的根本任务工夫。

    (2) According to the appearance of rust-proof oil, level, calculate the basic task required for the surface treatment of each workpiece.

    (3)依据分级规范涂层质量,确定工件刮腻子层,研磨工夫和工时喷涂层结合。

    (3) According to the grading criterion, the quality of coating is determined to scrape putty layer, combine grinding time with spraying time.

    (4)确定什麼样的腻子,底漆,涂料的枯燥办法和能否采用“湿碰湿工艺(不引荐运用自然枯燥爲佳),计算枯燥工夫,辅佐任务工夫要求

    (4) Determine what kind of putty, primer, paint dryness method and whether to use "wet wet touching process" (not recommended to use natural dryness is better), calculate the boring time, assist task time requirements.

    (5)依据工件大小和数量,确定单操作或个人举动,主件和文物数量少,合奏和组任务在不同条件下所需求的工夫。工件的总质量可以经过2% ~ 5%的工夫适当增加。

    (5) According to the size and quantity of the workpiece, determine the single operation or individual action, the number of main documents and artifacts is small, and the time required for ensemble and group tasks under different conditions. The total quality of the workpiece can be increased appropriately by 2%-5%.


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】